Is there any way to use sound programs from the original QS 4/4+ on the newer synths such as QS 6,7,8 and QSR? I know the structure is a little different, but...
Hi Artur, ... Yes, it's possible. The structures are a little different, by mostly compatible: they will load, they won't damage the other synth, and in most...
I've had a QSR module for a number of years but I have barely used it. I was just wondering if anyone could tell me what kind of a price I could get if I sold...
Hi All! I have two 20Mb AMD flash cards (alesis read first 8Mb only), worked on QS/S series who has the one PCMCIA slot, also I tested it on QS6.2 - ok. My...
Yes. Just run the quadrasynth sysex file thru whatever you got, (cakewalk, freeloader, etc.) into the qs. The waves aren't exactly the same but there are some...
Hi Bruce! ... mostly compatible: they will load, they won't damage the other synth, and in most cases the result will be at least similar to the old sound....
Hello, Prepal lists its current value at $304. Completed eBay listings from the last month show a range of $190 to $275. ... DAVID VESEL -- synthetic music...
I remember listening to the S4 demo at the store some years ago and there was this cool prog songs that I was really impresed. So, i was hoping someone could...
You get around $200 plus or minus a few bucks. If you have Q-Cards you can get anywhere from $50 or higher for them. Gene http://www.topsoundproductions.com ...
Hello DV, Thanks for the info. Do you think there is much of a demand for this unit? I was thinking of perhaps asking between $200 - 225 plus shipping. I...
I have been jamming with the drum/bass mixes where the drums beat and the bass notes sound. Has anybody taken it to a more refined level? If so, how, did you...
Friends, I have a loose Modulation Wheel on my QS 8. It is causing major intonation conflicts with the guitars in my band. There is too much looseness or...
Solution: Replace with a safety pin, I fixed my QS7 this way and i think others from this list have followed my advice with succes. Try diferent sizes to fit...
Hello Dave, I've had the same problem with a QS6.1 and my remedy is a bit different than the "safety pin" method. Here is an excerpt from an earlier posting of...
All Right !!!! Thanks a lot Bye ... Von: rusynth Datum: 03/20/05 22:51:00 An: 1alesis_qs_series@yahoogroups.com Betreff: Re: Betreff: [1alesis_qs_series] I...
Hi, I need to make a screaming mono lead sound modulate 2 ways. I need it to sine modulate and I need it to glide(portamento) with 2 different controllers. I...
Anyone interested in trading their QSR for my QS6? I have too many keyboards :) and I got a Nord Electro to replace my QS6 as my main gigging keyboard. But I...
I'm not really looking to trade, but I would be willing to consider 200.00 plus shipping for my QSR if you are interested. It's like new. I have barely used...
The internal battery is dead.No more user's memory. Can I change it myself? When I switch it on it makes a crackilng noise for about 5 minutes then goes quiet...
You can change the battery if you have decent soldering skills. Do not overheat the board, otherwise it is pretty simple. Can't say if the crackling noise is a...
The AMD 20Mb flash card, loaded by Q-Card Vintage Synthesizers collection, also you can use this card for your own samples, patches or sequences. Perfect...
When I use Sample Cell instrument files (.ins) loaded in Sound Bridge and then I save the project as image (.img) - I really save all sample (.wav) files...
Where I can find .img files of the following cards: Pop/Rock 8Mb, Rap/Techno/Dance 4Mb and Ethnic 4mb? If someone has it, please let me know. I have all of...
Hi, rusynth ! Could you send to me the Qcards .img files you have ? If not, where can I find them ? My e-mail address is brunomariani@... . Thanks ! ...
