Hey, I'm going out from the br900 with rca's into a pair of Samson resolve A5's and I've got a bad buzz. I can't turn the volume on the monitors even up to 1...
2782
Christopher Arndt
strogon14
Aug 5, 2009 5:29 am
... Did you try using a different rca cable? It may simply be a bad cable. Are you using the same power outlet for the power adapter of the BR-600 and for your...
2783
Chris Johnson
begacjj
Aug 5, 2009 3:55 pm
Probably not the problem but I thought I would throw this out there. Make sure the on-board mic's are turned off if the BR-900 has on-board mic's. -Chris ...
2784
Greg Curtis
gr4602002
Aug 9, 2009 2:27 pm
Hey guys is there a difference between the 900CD & the 900CD Version 2 recorders. If there is, is there any way to update a 900CD to Version 2 with software...
2785
Greg Curtis
gr4602002
Aug 9, 2009 2:27 pm
Since I haven't bought either of these recorders yet I'd like some opinions on which one is the better of the 2 & has the least problems....
2786
Tony Houston
zzt_1999
Aug 9, 2009 3:01 pm
Yes, the firmware update is on Roland's site http://www.rolandus.com/products/productdetails.php?ProductId=718&tab=downloads&skip=true...
2787
Tony Houston
zzt_1999
Aug 9, 2009 3:02 pm
I have a BR-600, and know quite a bit about the BR-900. It's more of a question of features. The BR-600 records to a 1GB CF card, and is a smaller 'design'...
2788
Chuck Cheek
ccheek50
Aug 9, 2009 4:01 pm
I master and burn CDs from my PC, so I don't need burner on mr recorded. I love my BR-600. Actually I have 2 because the data wheel on #1 started skipping, so...
2789
Tony Houston
zzt_1999
Aug 9, 2009 5:09 pm
Yo EC, Email me! Musically yours, Tony Houston The Primetime Blues Band www.primeblues.com ... From: Chuck Cheek To: bossbr@yahoogroups.com Sent: Sunday,...
2790
Greg Curtis
gr4602002
Aug 9, 2009 6:03 pm
Thanks guys for your responses they were very helpful to me. Those videos on youtube look like they are going to be very useful Tony in using my Boss....
2791
Greg Curtis
gr4602002
Aug 9, 2009 7:56 pm
Anyone using one of the Boss footswitch pedals to turn your recorder on & off. If so which one works better for this. The FS5U or L. Thanks...
2792
Tony Houston
zzt_1999
Aug 10, 2009 12:20 am
I use a DP-2: Damper Pedal http://www.rolandus.com/products/productdetails.php?ProductId=53 . You really don't need a FS5U or FS6...
2793
Greg Curtis
gr4602002
Aug 10, 2009 11:53 am
I have a Boss ME-70 board that I want to hook a MTR to. I have the FS6 to control the ME-70 and need a footswitch to turn the recorder on & off....
2794
chad
chad555
Aug 11, 2009 5:10 am
Hi Everyone. I've had my BR-864 for a while now. Me and a few friends of mine recently starting using it to record (with the on board mic no other...
2795
Jon Turk
turksongs
Aug 11, 2009 2:34 pm
Hi Guys: My first message...I have an 1180CD. I have done pro recordings in real studios and they use lots of compression for masters. Has anyone used the...
2796
Chuck Cheek
ccheek50
Aug 11, 2009 2:35 pm
I'm sure you have tried but, use an AC adapter, or new batteries, then I would try a full reset, then a reformat of the mem chip, if that doesn't work, I would...
2797
Greg Curtis
gr4602002
Aug 11, 2009 5:12 pm
On the Roland website it infers that new products are due to come out on 9/1/09. Anyone know anything else about this. Boss recorders maybe?...
2798
mwkiszka
Aug 12, 2009 8:30 pm
Hi. I just purchased a BR900 and have a question about the insert effects. Most of them sound terrible (ie: too much delay, reverb, etc.) and I've found only a...
2799
Chris Johnson
begacjj
Aug 13, 2009 10:03 am
You can edit the patches so they have as much delay, reverb etc as you want. I don't have the manual with me but the steps are in there. As far as digital...
2800
gitarista007
Aug 13, 2009 10:03 am
Hmmm... it is a matter of taste. I am an amateur musician, a hobbyist. So that may be the reason that I am fairly happy with my BR600. I have no pedals and...
2801
Joseph Gerard
apachelore2000
Aug 13, 2009 2:52 pm
Mr. Kiszka, The core of this question is regarding tone/sound. To want to taper down the level of the effect is to change the sound or tone. One man may say...
2802
chad
chad555
Aug 13, 2009 5:45 pm
Hey thanks for the response. I tried powering it up with batteries instead of the AC adapter, I still have the same problem though. I am a good Electronics...
2803
Chuck Cheek
ccheek50
Aug 13, 2009 7:16 pm
This should be a good place to start. http://www.rolandus.com/products/productdetails.php?ProductId=571 There is a link to the service center in So Cal on this...
2804
yezve
Aug 14, 2009 9:32 am
Is it possible to Mute the "Rhythm" track for the internal drum machine the same way as possible for tracks 1 through 8? Also, can anyone suggest songs...
2805
apachelore2000
Aug 14, 2009 9:33 am
I have 7 tracks bounced to track v78. I'm trying to burn to songs, both same numbers of used tracks, but it doesn't work. When I put in a cd, hit the cd-rw...
2806
Frank
frankdanabre...
Aug 18, 2009 5:03 pm
I currently have a BR-900CD that I've been using for a few years. I have an opportunity to buy a '1200 for 20% off, or about $720US. I'm sure I can sell my...
2807
apachelore2000
Aug 19, 2009 10:20 am
I've posted 10 new songs and info to my Wahi page. Check them out, all done on the BR900. From "I Am" to "The Staircase" are new. The others were posted...
2808
Dwight Duhon
daduhon1
Aug 19, 2009 11:14 pm
If you do decide to upgrade, I would like to buy your 900. Thanks. ... From: Frank <frank.dana@...> Subject: [BossBr] Upgrade to BR-1200? To:...
2809
dougmiller3699
Aug 21, 2009 6:28 pm
Does anyone have a good bluesbreaker patch created with the BR600? Similar to Clapton's tone in Crossroads or the Marshall Bluesbreaker amp? Thanks...
2810
Joseph Gerard
apachelore2000
Aug 22, 2009 10:03 am
I guess nobody could figure this out, or try his hand? ... From: apachelore2000 <apachelore2000@...> Subject: [BossBr] cd bounce confusion To:...
