need an ignition module for an 89 elite 250. will start some days, won't others. tap or beat on it, the scooter will start, run fine. does not cut out while...
And hopefully I'll be able to pick it up this weekend! What I have read about this bike is very encouraging. I would love to hear about how members of this...
rufos wrote: Question: (I) need an ignition module for an 89 elite 250. will start some days, won't others. tap or beat on it, the scooter will start, run...
Charlie, I just recently purchased a 1986 Elite 250. I love this thing. The more you own it and ride, the more you'll love it. I've taken mine on a 100 mile...
Okay, my '86 CH250 has the pearl paint color scheme. I love it. There are a few small scratches and scuff here and there I'd like to fix. Tech Tip #17...
I just got a CDI module for my '89. I also had hoped to find some less expensive option, but ended-up just biting the bullet and buying one online from...
P.S. Phil -- If you're wrestling with a wiring related problem, I recommend just replacing the whole wiring harness. I know it may sound like crazy overkill,...
... <http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=93212> This is a newer model but very similar to the one I bought about 5 years ago. I've...
"The bottom line is that to be detected, we have to decrease the loop inductance, and our scoots don't have enough peripheral metal to induce sufficient eddy...
... think ... it ... Good luck with your scooter. I love mine but I wouldn't recommend it for touring. The short wheelbase and upright position is better ...
Mark, I don't know what I'm talking about any more than the other posters, just added a source of information. Personally, my experience is the same...
Pretty good writeup. I would remove the exhaust nuts first entirely to prevent any torque from being applied from the muffler to the studs. You also neglected...
Yeah but the Helix is Butt-ugly! John in Seattle ... From: gietlted <gietlted@...> Subject: [CH250HondaElite] Re: I've put a deposit on an Elite 250 To:...
has anyone pulled the black box apart? why don't the others from other honda singles work, just the plugs maybe? the box i have to tap is just to the rear of...
Too bad the lead in my a$$ doesn't count. ... Mark, ...... I suggest that for a loop design meant to detect bikes and scoots, that is marginally out of...
Does the CH250 have a shorter wheelbase than say, a Vespa P200E? The small wheels and short wheelbase may it easy to handle around town, yes, but don't sell it...
Phil, Have you tried pulling the connectors and cleaning the contacts? Get some contact cleaner from Radio Shack and squirt it in the connectors. You might...
I picked up a nail last week and limped home with a flat rear tire. Removed the rear tire no problem and had a new one mounted and put the rear back on this...
Never mind. I have too many bikes of different types. I forgot I have to have my foot on the brake pedal while she's up on the lift! Fired right up. I do...
put in a NEW gasket!!! Brett <brettdebo@...> wrote: Never mind. I have too many bikes of different types. I forgot I have to have my foot on the brake...
Is your b ... From: Brett <brettdebo@...> To: <CH250HondaElite@yahoogroups.com> Sent: Wednesday, October 01, 2008 9:47 PM Subject: [CH250HondaElite]...
... exhaust gasket when you remove and re-install the muffler. ... I would add this as it has happened to me with my current rebuild. Install the manifold nuts...
Your battery needs replacing. The tender charged the battery to its remaining capacity... which was not enough to turn over the engine. Jack Stanley ... From:...
Well I did a leak down test air was coming out of oil fill hole pretty obviously. So I tore the engine out of the bike and the piston is badly scored with the...
Could also be...... Loose battery terminal Low battery water Bad or loose wire on starter solenoid Stuck starter Motor frozen Starter switch Kick stand down or...