Hold on to your hats, boys and girls. Move over Kenwood stereo. Step aside carpeted floor mats. Markland chrome bars to the rear. Here is the oddball of all...
At one time Hondaline sold a glove holder as an accessory for the CH250 if that is what you are referring to. I might have a part number around here...
Thanks! It was allot of fun to build. I used some muffler pipe and an old steel lawn chair for the metal, CT 70 fenders, and Bridgestone Trail tires. If you...
I'll give it a shot. I think it connects under the left and right handlerbar control housings, (where the light and starterbuttons are) with the bar coming out...
Looks to me as if the attachment points to the CH250 are the mirror hex head bolts. Assuming you had one of these staring at you down the road, what do you do...
That seems reasonable too. Those are pretty stout M8 bolts. What is the dia. of the rod used for that bar? I guess you could use it to drape a cloth over the...
I sent an email to the seller asking him what a glove grab bar was, and he told me he doesn't know, but that's what it says on the box. Then, I figured maybe...
The upper front body cover on my 85 ch250 has two plastic parts on either side of the headlight that look like they are made to have something attach to them....
Windshield brackets. Also for the "Honda" nameplate AFAIK. ... From: "Daniel H. Wilson" <danielhwilson@...> To: <CH250HondaElite@yahoogroups.com> Sent:...
I am not sure myself, they may be used to mount different types of headlights for other countries, but they are not for mounting a windshield, or a name plate,...
Take a digital photo of it and send it to me and I'll post it. Very hard to determine something imaginary. Randy Pozzi ... of ... than the ... Wilson" ... ...
Just bought a new battery because my old one died (or so i thought -- read on for more) -- seems now that it isn't getting any charge, because now the new...
Hello , there is a few posibilities , first quit the battery , start the engine and check with a tester if in the bat terminals have power when the engine is...
2 months ago , i'm replace the starter clutch with a new one , now he is dead again , i'm tired of this shit system , i don't know why honda used this one way...
I had starter clutch problems once on an xc125. It needed hi-moly lubrication but there was no indication anywhere that that was the case. I'm not sure what...
Hey everybody, i'm a newbie and i got an 85 honda elite just a week ago. everything seemed to be working right when one day the rear brake started locking up...
Dear Superspy: Pushing the bike off the centerstand with the parking brake on would not have caused your problem. That process would not necessarily by itself...
the ch250 starter clutch it's inside of engine , lubrication is provided by wet of engine oil . Adrian Roux ... case. I'm ... now ... why ... clutch ... other ...
The Honda CH250 engine oil change is quite simple yet ignored by many owners. Honda did not include a paper-type oil filter in it's design of the CH250. The...
What brand and octane fuel do you all use and what is your comments on that fuel? I am trying to determine if I need premium, mid grade or regular. The scooter...
Hello Dave! The CH250 will run on most any grade of gasoline with an octane rating of 87 or higher. It has hardened valve seats and can take the poor gasoline...
Run the cheapest one. If you think you need to clean your fuel, pour a little kerosene in the gas tank. ... From: "Dave & Nancy" <davennancy2k@...> To:...
The following Tech Tips regarding the 1985-88 Honda CH250 have been archived: Tech Tip #1 Breather Separator Tech Tip #2 Drive Pulley Weight Rollers Tech Tip...
Randy, Thnaks for the info on the starter clutch. My original starter is starting to slip at 13K. Also, I didn't see any tech tips past #15 in the files...
I have a stock windshield. It was hazy and kind of yellowish when I got it. It also had gobs of duct tape adhesive in several places, and a big round angry...
My clutch problem returned after a month- rear clutch shoe glazing and a oily film on the inside of the clutch drum. I'm determined to fix the problem so this...
Someone posted earlier about noise in the rear end of the CH250 and it sounds similar to mine. I copied some of the original post below: My problems: 1st...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
