I've been using a Gerbings heated jacket with my motorcylce. Today I bought a cigarette lighter attachment kit for possible use with my scooter. Has anyone...
Off topic, perhaps, but I'm guessing most listeners can relate, so.......here goes. A while back a replier (think it was zozman) mentioned his wife had given...
Harbor Freight has nice Impacts for well under $100.00. You'll need 1/2" drive for automotive wheels and such. If you don't have an air compressor, an...
I got an electric one on ebay for under $50 delivered. It was brand-new. It took off the countershaft nut on my ZRX1200 in a few seconds without blocking the ...
It was I who stated his wonderful wife bought him an electric impact wrench. Of course, I recommended it to Santa. I purchased a Milwaukee 1/2" impact...
Hi Randy... "It was I who stated his wonderful wife bought him an electric impact wrench..." Your right Randy, I met your wife and she is wonderful!!! Merry...
It should work fine. The CH250 has a 12V. 240 W @ 5,000 rpm alternator and after subtracting the headlight and ignition requirements, there is enough left...
Ah, one of my favorite subjects. What impact to get depends on how much you want to spend, whether you have an air compressor, and whether you'd prefer a...
Hi: this is my favourite site about scooters, since thanks to people like Randy and Dennis, it is more about physical fact and mechanical experience and less...
... www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=90672 I have several impact wrenches, air and cordless electric, but I use one so seldom that...
In an earlier post Randy Pozzi said you can use a Sears Craftsman 1-5/8" SAE in place of the 41mm socket. I have also found the 1-5/8" sockets at "Tractor...
Thanks. I'm going to put off any engine work for a while. I've decided to route the crankcase ventilation tube to a catch bottle instead of the airbox. That...
i thought id post a progress report. i had a friend come over and give me a hand (read do it for me) he brought over his work tools, and something that i had...
can anyone tell me if the slots in this part of the driven face are meant to look like this ? to me, they look like they are badly worn. i need to know if i...
Everybody ought to look at this picture of an extremely worn driven face to see what one looks like. Not normal. Very worn. Replace. Throw it in the scrap bin....
Yeah, thats worn, you can replace it or as your friends a fitter you can do as I did to a worn one, build it up and mill the slots straight, thats the...
thanks for the info. i thought it looked worn. i will be replacing the entire unit. not sure on the australian $ figure for it yet. if it's too high i might...
Hey Jason here's a word to the wise, your in OZ right? the drive face comes from Japan, order it from Japan. Anything US members buy for their CH250 comes from...
thought id let you all know that i have posted the 2 meg owners manual on my webpage. if anyone wants it. it's not the service manual. here is the link. (right...
Great idea, Neil. Provide us with a Japanese web site where we can purchase Honda parts and save on all that shipping! Randy Pozzi ... from Japan, order it...
just got home from ordering the parts. the total cost was $257.00 AU. that is for both halves of the driven face, and all bearings ,seals etc. not too bad. im...
Jason: A complete clutch rebuild here in the USA runs for parts alone about $225 USD excluding the outer clutch hub. I have seen clutches need a rebuild at 300...
it was during the process of replacing the clutch shoes, weight rollers and drive belt that these other things were discovered. so once this job is done,...
i was just looking through all the pictures of members scoots and i saw that someone had used cb350 shocks on the rear of their ch250. can anyone tell me what...
That was me, and I had to beef up the engine hanger. On the other hand, I weighed 200 lbs at the time, and my girlfriend weighed about 140. (don't tell her I...
I bought several sets of the Honda CB350/450 shocks for this exact comparison. They are superior to the OEM CH250 shock in damping, ride handling, braking and...
Interesting advice from Dennis and Randy about substitute rear shocks. I'm tempted to try it as my shocks are definitely shot (at 14,000 klics) and I think...
thanks for the info. my rear shocks (and probably the front too) are shot. they have no damping left in them at all, and they are simply holding the scoot up ...
After-market shocks by Shortleg or Dugout will fit the front and eliminate that floating boat feeling. paul <magoo@...> wrote: Interesting advice from...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
