Dave, could you describe your 'rev counter'? Ie., is it a conventional tachometer? Reason I ask is that I've heard of portable induction tachs that are good...
Again, I don't know the availability of the ML8 in the 4X10 which as we all know now is the proper size. However, I've been able to spend a bit of time now...
Hey Dave, The ML36 is listed at a 120/90 10 now even though I use this whole metric thing at work well it's just confusing. You do have to wonder about a...
Thanks for the kind offer--I actually have one of the jackets they our outstanding, made to order for no additional charge. There is a whole weird world of...
any reason no one's tallking about the ML16/17 combo. Looks good, feels good, they're available all over... I use 4.00x10 front and 120/90x10 rear. Fred...
a friend dated it around '84 and yes the flip up lights are serious cool... when they worked (can you tell that i once had an elite 150 with a broken light...
Can there be a link posted of just that commercial as I would like to forward to some friends/family but when I open link as is, there are some things,...
... I have an 87 250 with 42,000 on it. All I have done to it is change the oil regularly, changed the air filter at 20,000, and replaced the drive belt at...
I bought an '86 speedo unit off ebay a while back and the odo registered 41k miles... I would say it is worth it to overhaul these engines or replace them...
post this in an email for them (but make sure you take away the * at the end; http://youtube.com/watch?v=KQrwuPmM9EE* that should work -jayrod ... to ... (can...
This discussion only came up because the shop where I took my bike (1985) in error put on the ML36 I had ordered for my 1990. I was not sure if that would be a...
... Absolutely agree. My '85 has 32k, and is showing a bit of blue smoke. I'm gathering parts, and figure at about 40k [another couple years] to rebuild it,...
Hey, is this a new feature at www.servicehonda.com? I thought I had visited this page before: http://www.servicehonda.com/hard%20parts/hard_parts.htm ...
Okay, I'm not the sharpest tool in the shed. I checked the tech tips but did not see this. My rear brake pedal seems to go down too far? I had new brakes...
Correct me if I'm wrong....I hope I am but I turned the nut for the brake (by rear wheel, left side) but that "engaged" the brake, it did not raise the point...
Tightening the nut changes the point at which the brake >starts< to apply pressure. Measuring from the brake pedal, about 1/2" from fully extended. It doesn't...
Scenario: All of a sudden, the bike doesn't have enough juice to start- -got the grinding sound from the starter. I test the bat for volt levels--11.5; so I...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
