Check out the SHAD top boxes (www.motovan.com) before you buy anything. SHAD is a Spanish line of top boxes and sizes range from 25 to 48 liter capacity. The...
Jerking at low speed likely due to worn clutch AND/OR drive pulley system (CVT)........if not repaired, can only get worse and cause more damage. Fix now, or...
Added image of Shinko SR426 that I am using on my 85/6 CH250. They fit perfectly with just a credit card thick clearance on the rear, and wear like iron. The...
I recently loaded my Elie 250 into the back of my pickup for a long distance transport. When the scooter was tipped way back to load it, the front wheel was ...
Can you help? I have a replacement push/pull plastic throttle body to replace. Can anyone tell me how to get enough slack in one of the cables to release the...
Steve wrote: Question: I recently loaded my Elie 250 into the back of my pickup for a long distance transport. When the scooter was tipped way back to load it,...
Mr. Recumbent7 wrote: Question: I have a replacement push/pull plastic throttle body to replace. Can anyone tell me how to get enough slack in one of the ...
Pete, Got any photos with them mounted? Where can you get them? Jonathan Confidentiality notice: The information contained in this email message including...
There is a picture list for removal of your carburetor; http://ch250.net/procedures/engine/Carburetor.htm The second pic is of the cables and bracket. Remove...
Posted new pics of SHINKO SR426 scooter tires mounted on my CH250. I bought them at a local generic motorcycle shop and have also found them on the internet...
Man I'd think twice about doing the shock mod with that rubber on the rear! John in Seattle '86 CH250 PEDER LINDGREN <peder_y2k@...> wrote: Posted new...
Hi All, I just wanted to share with everyone the experience I had recovering my seat: I purchased the cover from a guy on ebay who makes seats for a bunch of...
Thanks Randy! "Answer: I have transported many scooters in the manner you described. If the oil deposit was milky clear, it is from the transmission. If the...
Hey all, my 85 elite 250 is having brake light issues. The brake lights and blinkers stay on all the time, and the brown/blue wire gets hot and it the plastic...
Randy wrote in response to Steve's question: (If the oil deposit was milky clear, it is from the transmission. If the oil was blackish color with some water,...
Hi all, Did a quick search but didn't find any posts that sound similar to my exact problem. My 1985 CH250 has been a little difficult to start over the last...
it could be the starter or the starter clutch. you won't know for sure until you pull the starter and test it off the scoot. you CAN pull the starter motor...
Thanks Tone, if you do perform this operation that in transit suggested, could you document it and send me the pics and we can add it to the CH250 site. With...
in transit & Doug, Thanks guys!! :) Will try this on the weekend. Am happy to document how to remove the starter motor without taking the engine out for the...
Well I finally finished the tech tips portion. Sorry it took a while; I am off from work with an injury to the right arm. Nothing to do so I thought I should...
The carb removal is done, I hope it covers it correctly. If not, we can treek it. http://ch250.net/procedures/engine/Carburetorremoval.htm Doug ... while; I ...
hi evryone..i have an 86 elite 250 (black). with 1600 miles!!! just changed oil(synthetic),plug,air filter(25$).. THIS THING RUNS LIKE BRAND NEW! the panels...
Pete mentioned that the service manual did not download. that is because it is a very large file and needed to be right clicked and downloaded. I changed to a...
I haven't replaced the starter yet (I haven't had time yet!), but I was wondering if any of the CH250 gurus out there could listen to this and see if this...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
