Hello Everyone: I would like to make my own splitter cable for the 9 and 10 triggers on the DTXpress 2 so I can use two separate triggers. Does anyone have a...
Terry, I don't have a drawing, but it is fairly straightforward. You need two mono sockets and one stereo plug. Mono 1: socket tip to tip of stereo plug,...
Terry, I use a HOSA YPP-117 Y-Cable. It's two Female 1/4" mono into one Male stereo 1/4". There are some on eBay - probably cheaper than from a retail...
Hello, I have a DTX II kit that has worked perfect for years (and still does). The symptom, I had a live gig outdoors and my dual bar pad (inputs ch 9 and 10)...
It sounds like pickup of some interfering signal, although why it should be worse outside is a puzzle. Normally such problems occur near mains cables. While...
Have a roland spd-20 with roland stand fs 500.00 paid 800.00 for spd and roland stand. Has 900 built in drum kits and also good for midi. I will not turn down...
Hi, I know this has probably been mentioned on here before but can anyone provide me with some schematics and instructions to build a dual trigger switch to...
... I am not sure if it is what you are looking for, but in the files section there is a circuit called "DTXpander cheap" which will allow you to convert two...
Hi. I bought my son the above kit second hand but it didnt come with the speakers that the new ones do - I think they clamp onto the frame. Can anyone advise...
Pete, The DTXpress doesn't come with speakers. The ones you have seen in brochures will probably be the Yamaha ones, but they don't seem to be very highly...
hi, i have an old dtxpress drum kit. i mostly use my laptop + a drum sampler called battery 3 to make drum tracks, though. my current midi controller is a...
I can't help you with the midi stiff (although I am fairly sure that it is possible to do what you ask - hopefully someone will confirm it), but the manuals...
Hi, Yes it can be done. I use an M-audio usb uno. Make sure your selector switch on the back of your DTX controller is set to midi. Fire up Battery, load up...
Hi Dave, Thanks so much. Keith - I found the links to the manuals, thank you for that. I'm glad this is a possibility. I'm picking up an uno this afternoon,...
Hi Keith, Right on the top bar of each (see screenshot attached). Ie C1 C#1 D1 etc. As I said it is a little time consuming setting up each pad in the DTX but...
Thanks again, Dave, The attachment says 'Not Stored' but I'm sure I can figure this out. If you happen to have another way of posting the screenshot please do...
there you go Dave ... From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com] On Behalf Of selfcase Sent: Wednesday, June 27, 2007 1:39 PM To:...
Thanks very much, Keith! Alright, I've been playing around with this for a bit and have come across a rather unusual problem.. Sitting down and playing the kit...
Hi, Sounds really strange. I just tried it in Cubase LE and all works fine for me. I'm thinking maybe a driver/ O.S. problem. Have you been to the m-audio...
Hi all, I own a DTX Press IV special and I wonder how I can simply record it on my PC. I don't have any software like Cubase or else neither a midi cable... I...
... on my ... Tom, You should just be able to use the headphone or lineout from the DTXpress. You need to turn the volume up a long way to get a decent sized...
Hey Dave, I'll give it a shot. I used the drivers that came with the uno, but I'll see if there's an update on the site. You didn't have to play around with...
Hi, It's been a while since I first set it up, so what I did was go screen by screen in the UT menu for midi and compared with the manual, which I am assuming...
Thanks for all your help, Dave. I'll check it out tonight and see what happens. One last question (if you're still around) - does the midi-out light on your...
Yes if I select it as a midi output in Ableton and play a midi file. The DTX plays. Dave ... From: DTXpress@yahoogroups.com [mailto:DTXpress@yahoogroups.com]...
I had very similiar problems with the USB Uno. It was driving me crazy for weeks. Read some old posts on here and bought the Yamaha UX16 USB adapter from...
Hi Guys, Please help me to load a midi song to my dtxpress 3 module. my module at the moment has 1 song (aside from the default) but i cannot remember how i...
Hello, This is not strictly a DTXpress question, but I'm hoping someone here will have some experience with the older Yamaha module. I use a DTXv2 module and...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
