I just got a Rev last week and I'm enjoying the hell out of it! I can't wait for the XS. (Ok so I couldn't think of anything else to say and nobody else is ...
No crickets. It's the chirp chirp of my revo's resonance filter. I was tooling around with midi tracks on the Jomox Xbase999 the other day, and recorded. ...
I am awaiting the XS as well, Mobius + XS, me thinks will be nice... ... From: chitba To: FR-Revolution@yahoogroups.com Sent: Wednesday, February 07, 2007 3:09...
I turned on my kit today and find that SN #0062 will only trigger notes from G5 up to C9. This is a change in behavior from what it normally does. My other...
Hi Eric, Normal playable range should be C1 to D#6. You might check the transpose setting on the unit giving you problems, and reset it to a value of 0. Or you...
Hi Jered, I came back from a bit of poking around to say "oh! nevermind, it was transpose". On revo #0062 it was at value minus 55. You beat me to it with the...
Hi Eric, ... If your battery was completely drained when you replaced it, then yes, the memory does become randomized. In which case we recommend doing a soft...
You guys rock! Thanks for the like 5 minute reply! ... From: Future Retro To: FR-Revolution@yahoogroups.com Sent: Wednesday, February 21, 2007 2:08 PM Subject:...
You need to use a Y adapter. The single input into your Revo out, and the double input into your amplifier's L/R IN. _____ From: FR-Revolution@yahoogroups.com...
this might sound really stupid but ive just got my machine and cant figure out how to save patterns. ive read the manual and tried cutting and pasting and have...
Hello, All you really need to do is select a pattern to edit, enter the pattern edit mode, make the changes you wish to that pattern... and you're done. There...
Hi,thanks again for the help..But,when i try midi ing the Revo and my MC 808 i get nothing.I ve tried out from Revo to in MC and also in revo to out MC and...
Has anyone done any modifications to the Revolution? Can any be done? I'd like to hear what kind of sounds people are getting out of this unit other than 303...
sorry, i meant i have tried cutting and pasting to another pattern even, but when i turn the machine off and on the next day it has reset to the factory...
I've done 3 swaps on my FR kit (2 revos, one 777). It sounds a lot scarier than it is. I do suggest the battery holder method, and use hi-temp ball/ball...
Hello, ... Ok, so just to make sure... When you copy a pattern, you are holding the step-key for that pattern, then pressing the Copy/Time key? Then to paste...
I just had Jered tune up my 777 a few weeks ago, but I'm still noticing a bit of high end noise. Sort of a static noise when the 777 plays. This wasn't...
Hi Brian, Make sure the noise source is not turned up. You may also get some ground floor noise if your overdrive is turned all the way up. Also, can you tell...
It's running into a Mackie 1620 Firewire Mixer. I tried bypassing all the EQs for comparison, but the noise was still there. I found the noise most prevalent...
When you say "mod amount" control, are you referring to the filter modulation section or the oscillator modulation section. Also check to make sure you are...
I might suggest, that Brian if you could get a recording of the noise you are hearing, it would be visible to see what sort of noise it is... ground loop or...
I did hear once somewhere that the unit sounds better when it is freshly turned on or the opposite, when it is warmed up; is there any credence to this? I...
