I bought a new Planet Waves 13 pin cable a while ago because the original cable had started triggering the synth when ever I move it. This is particularly...
I have had the same problem too. It's caused by twistes in the cable over time that fray the tiny mini wires in the GK cable and they sometimes become crossed...
Yes this is a common problem! I have found that passing the cable over the strap button (so it's held tight between the strap and the body of the guitar) helps...
I do that... I make a loop through... then use the bungee thing to secure it to itself about 6 inches down. If I don't do this, occasionally, it pulls...
Louie, I've also had to replace a number of the expensive 13 pin cables. They do seem fragile. Most recently I had what appeared to be the same problem, but...
well, the good news is that it's the cable and not the guitar ... i mean, if you have godin, anyway ... ... [Non-text portions of this message have been...
Nope... I have a MIM GR-Ready Strat with the internal GK... and a PRS Standard with a GK-2a installed. The little 1/4 - 1/8 cable crapped out on the PRS from...
i play a Godin XTSA with the synth pickups in the bridge. everything is internal. far better than having an external GK-2A. never had trouble with false...
I guess I could be lucky, but not much trouble so far...although having said that, my cables are genuine Roland, and I DO carry a spare.. :-) All my guitar...
I will be out of the office starting 25/09/2008 and will not return until 06/10/2008. For Customs Reporting please refer to Elizabeth Miller For Customs...
Hello, I need you help and good ideas for my system setup. Since many years I own a GR 30 and I was happy with unit. But now, since I really would like to...
I have a Gi-20 and a GR-20 and I can tell you unequivocally that, despite hours and hours of mucking with sensitivy settings etc. on the Gi-20 it simply...
Hey all I'm currently selling a 2000 Fender Roland ready strat body on ebay item ref 110296479364. I may also be listing the electrics for it in the next few...
Today, after a very loooooong time, I played my GR-33 into a separate channel of my guitar combo-amp (Fender DDRI) - it sounded better to my ears. Do you guys...
I have always used a separate amp and cabs for guitar sounds vs. GR-33. My chain to them is: 13pin from guitar to gr-33 1/4" from gr-33 phones out (I do mono)...
With my 1st GR (GR-09), I used a Mesa Boogie DC-5 for the guitar signal and a Dean Markley K-50/Whirlwind DI for the GR signal. That rig was stolen. When I...
To my ears the onliest way to go is to use separate amps for the guitar and synth. I do not want guitar amp coloration on my synth sound. I run the Guitar Out...
Buy Vetta !? Well, I was never happy with anything but tube amps. Even at <$300 level ... I have some of these other things like VG-99 or ToneLab yet in...
I DEFINITELY use a separate stereo-amp for the GR. (PA-system with a Behringer 16 ch mixer and 2x250 Watts). Sounds a LOT better (no unwanted harmonic...
Many of the old Fender tube amps invert the phase of the signal on the Dry v. Vibrato side and that is why you don't see many older Fender with A-B boxes - it...
... a Behringer 16 ch mixer and 2x250 Watts). Sounds a LOT better (no unwanted harmonic distortions due to 3 different signals of input on one channel), more...
Sorry, maybe I got u wrong. What I'm trying to say is that it is not advisable to use - for example - a combo-amp with 2 channels (like one "clean" and one...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
