Just to be clear,
On the MIDI Mode/Receive page, you can have MIDI Mode set to Multi.
That is a good basic setting for most tasks.
On the MIDI Mode/Transmit page, Control can be set to BOTH.

> >My problem is, that when I record something in K2000s sequencer for
> eg. tracks 1,2,3 that use a local sound on K2000, on playback that
> track sends also a MIDI Out message on those channels, and I want to
> have these channels only Localy

When you are in Song Mode, select the Song and press edit to
enter the Song editor. On the COMMON page (i.e., the first page
you see), there are settings on the bottom for TrackDest (track
destination).
You can set each track independently to L (Local), M (MIDI OUT only),
and X (off?).
I think the dash means both (which is the default).

> (when set to Multi and Both on the General MIDI/Send page).
> And I would like to use some other MIDI channels for
> controlling/sequencing an outboard rack instrument, so turning off
> globaly the sending of MIDI Out is not good.

The SONG EDIT/COMMON/TrackDest should get you what you want.

If you want to have the track play two different channels,
copy the track and have one play locally, and the other play
on M (MIDI out) on a different channel.

Let us know if this solves it.

Jon

[Non-text portions of this message have been removed]