I also have the needed files.....check the connectors behind the left front panel for lose or disconnected multipin....it connects wheels and the AB sliders to...
Hello - Last week, we learned that a hacker got into our e-mail account and sent out a (harmless, thank goodness) spam e-mail to all of our contacts. Apologies...
The K2000 has a bunch of 1 cycle waves, organ waves, synth waves, etc. You could find one that has close to the timber (tone) you need, or sift through a bunch...
A few years ago I put my K-2000VP into storage (in an air-tight case so mildew isn't an issue) and when I got her back out I was getting fizzy and distorted...
The scratchy volume control would indicate that there is now a DC offset from the effects going into the audio. If you turn the wet/dry to 0%, the scratch...
25979
R B Meng
rbm314-list@...
Feb 29, 2012 6:03 pm
Be aware that the audio is routed through the 1/4-inch insert jacks (A and B) prior to arriving at the effects chip and output circuitry. The audio is...
Agreed, it can not hurt, but will not help, as the effects processor is post the A & B. jacks. I use the direct A & B outputs, bypassing the noisy Digitek...
i need a battery cover to i think the only way is to get some one to template one for use in an injection mold machine as for the pram i can get 300-400...
When I left Kurzweil, there were over 50pletebattery boxes in stock, they were transferred to AM&S 3 years ago when they took over the US/Canada distribution...
I've given up trying to repair my screwed-up k2000 effects board (essentially the same issue) after too many hours checking ttl chips with the dmm and ending...
Thanks everyone, downloading now. I have already checked the multipins and they seem fine. I suspect the digital ground or the ADC. I'm going to replace that...
I had much the same problem - took the board apart (really simple, just screws on the bottom of the unit), then took any card that wasn't screwed-in and pulled...
Thanks to Roger I was able to repair my Mark 152 by replacing the ribbon cables for treble and bass....great to hear it play again....all notes now play...
If you find it please let me know. I would like it as well....Thanks! Gary From: KurzList@yahoogroups.com [mailto:KurzList@yahoogroups.com] On Behalf Of...
Where in Las Vegas NV can I get a power supply for a Kurzweil Mark III? Yes, I know it is an antique, but never had a need to replace it and NEVER had a...
Heh! What is this? One spam message in the last several months? No need to complain! Some of the users that have been around for years have autoposting...
I have used Advanced Musical Electronics in LA for my Alesis QS repairs. They are fast if need be but it costs a bit. Ruth Fischler is the owner and is who I...
When the K2 was new, I was the senior tech and 5 years ago the service manager. I currently have a small shop in the IE R ________________________________ ...
I've used Ampwerks in Long Beach. Located in Gilmore Music at 7th and Cherry. The guys name is Armund. He did an overhaul on my K2500xs. And he did a good...
I have also used him to fix my power supply and some other minor issues on my K2500XS. He does very good work and is pretty easy to deal with. ... From:...
I thought everybody knew this, and it's sort of irrelevant in a way, but Who material was pre-sequencer. The effect was produced with an arpeggiator on a...
Hi Les, As you say I have seen Townsend demo how he used to do these things. Extremely cutting edge, very imaginative stuff. Many years ago we did Won't Get...
Hi all... been awhile since I've had something so totally perplexing, and I am really in need of a solution (other than using floppies) as I will no longer be...
