A few months ago I asked for help with my K2vx. It keeps turning it self off and also has an ever changing contrast on the screen. Everybody said it was the...
Hi there, I recently posted about some problems with my SP88. I'm not a tech guy, but I was able to take it apart, clean the strikepad, and get all my keys...
I do not have this issue, but I have heard of it before...It may be a heat related issue. The K2k can get really hot without a fan. Especially if extra RAM or...
I just noticed something and thought that maybe it would be a clue to you guy as to what is wrong with my K2vx. When I power on, the little light over the...
Thank you so much! Mine does have a fan, so no issue there unless it is turning slower than it should... But your other comments will be printed out and given...
Did you try using 3 new AA batteries in the bottom? That could be your issue. I would also recommend a hard reset (hold 123 buttons and power on). It sounds...
I have setup 8 different Midi Setups on my wife's PC88MX. What I did was take a piano sound in #65 without midi transmit. Then #66 is the same piano with midi...
... Hi Jon, Thank you so much for your information and quick response. I will check these parameters out and make up new setups. Once again, thank you very...
... It appears that the problem was that I had "Entry Transmit" in the Zone parameters, set to "Off". Once I set that to "On", problem fixed itself. Thanx so...
Ha! And then of course there's the "Entry Transmit" issue. Well, good for you, happy to hear you didn't have to redo the default templates. Kurzweils are deep...
Hello all, I recently purchase a used, SP88x for my daughter. It looks brand new. However, the volume slider does not attenuate the sound. I've checked it,...
Most likely the slider took a blow and it flattened the contact wipers. Easy to check with a basic meter. As I recall, it is a 10K "B" or linear pot. It can...
This is the standard monthly reminder FAQ for KurzList. The Kurzweil Musical Instrument E-mail Discussion List For help: http://k2users.org/k_mail.htm Over...
... ********************************************************************** Hi Jon, I got helpful info from you about this last issue, so I thought I'd ask you...
hello, i have a Mark 152i piano and some if not most of the keys seem to be squeaking whenever they are played. i was wondering if there are any quick and easy...
More so on the naturals or just some of both the naturals and sharps?key down or key up?                  ... [Non-text portions of this...
The solution to a problem appearing after you've worked on something almost always involves taking it back apart and checking everything you touched. Those...
I believe you're looking at the same issue as with the other problem .... after you've assigned the patch to you're zone use the alpha wheel to scroll through...
Yeah. I really jammed it in there. I think I need to take it out and gently put it back in. I don't use the sliders. In fact, I use the entire keyboard as a...
I think you will find that where the key contacts the hammer is the source of the problem. There is a plastic actuator on the bottom of each key. This push...
Hi Spence, You have to double check the orientation of the strip cable, normally it has some kind of clip that make it just fit one way, but if it doesn't...
hi Spence; My recomendations is to take the keyboard appart again, check the orientation of the cable strip. Normally it has some kind of clip making only one...
What do you see when you put the Kurz format CD in the pc drive? I only have CDs I made myself from the public domain *.K** files, and the other manufacturers'...
