I gotta put in a plug for Syntaur as well. The FAQ has the pointers: From the Mirage-Net Links page: http://www.webcom.com/jawknee/Mirage/FAQ.html#4 Syntaur...
Hey Guys, Thanks for the input on the Loose Wire Problem. I have put two photos in the FILES section, In a LOOSE WIRE PHOTO folder. "Photo 1" shows the loose...
Oops - wrong one. I have the original DSK-8, but yours is the later, plastic model - also a DSK-8, but sometimes called a DSK-8+ (serial numbers 14731 and...
JK, Did not want to start plugging and unplugging till I got the feed back on the photos. Yes, case is definatly plastic. So,I'm guessing grounding is not as...
Fair enough. I meant more just making sure you don't have an intermittent on one of the connectors (definitely to be done only with the power *off*). Good...
heheh....as part of the package of disks etc...i found my syntair catalog, so that6 is going as well....if not for them, i'd have had a $200 paperweight. On...
Hi, Just took a look at your Photos and inside my DSK-1 (plastic case). The grounding Wire needs to be connected to the heat sink. The two empty holes hold the...
I have a Mirage rack and several boxes of disc's. Does anyone have experience with a software sampler that reads Mirage disc's so I can store all of them in...
Hello, This is the first time I write you, I'd rather read all your messages as my English is not that good. But I'm on an emergency! and I hope you'll help...
Hi folks, I've got a "stereo" mirage that is (figuratively) gathering dust in my studio. It works like a charm (fired it up just the other day). I have copied...
Are you willing to sell some of the keyboard contact strips? I need a couple. Regards, Evan. James <sinsect@...> wrote:well, my mirage died a few days...
Hello, Mirage-Net member. This company really helped me out. I almost lost my home. I am self employed and I was able to refinance. The best interest rates are...
Hi group, got my old mirage ages ago but never really got round to doing anything with it but now seem to have some free time. Anyway, I powered the old girl...
Chris, To load the other samples on a Mirage disc: 1) Go to the keypad section labeled 'Load' (white buttons) 2) Press either/or both 'upper' ; 'lower'...
First, I'd recommend getting the Musician's Guide (Owner's manual) from Syntaur. Using the Mirage is many things, but it's not intuitive. For loading sounds...
Thanks for that jk and Vid. I do have the MASOS manual but its all a little bit heavy for me for the time being. One of those walk before run scenario's. ...
That's a different manual - you'll just about *need* the Musician's Manual. It's much lighter - figuratively and literally. -jk ... <image.tiff> ... ...
In a message dated 7/20/2004 10:45:51 AM Eastern Daylight Time, bluzeeone@... writes: I just bought a Rack Mirage....How the heck do I connect this to my...
Hello all, Things are hot and heavy here on my new album, and I've been able to find a use for my Mirage on just about every track so far. (On the song I'm ...
I want to set it up where I can use both disks at once. For instance ...strings in one and a piano in the other...and when I play the keyboard I hear both...is...
You can do that by simply using LL (load lower) and LU (load upper). If piano is sample 1 on a disk, and strings is sound 3 on another, and you wanted piano on...
Just use a MIDI cable to connect your keyboard to the rack unit. Set them both to the same MIDI channel (parameter #82). Connect the audio out from both units....
Lou Champagne
lcsinc@...
Jul 20, 2004 5:39 pm
4551
No problem - just load each with the sound you want - if you want them to play piano and string sounds from the same part - set them to the same receive...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
