Hi, Before you write the pot off remove it from the P6, find the cleaning hole and give it a good hard blast with IPA spray. If it still feels gritty then the...
Hi Radek, It's Sunday! Here are the dimensions. The mod / pitch wheel has a radius of 35mm and a width of 8mm. However, be careful with these dimensions are...
Hello good people from polysix support group. I have one pretty annoying problem with my beloved polysix and I was hoping if you could help me. I got it back...
Hi Milan, You should take the board back and tell him he hasn't fixed it properly! ;-) Seriously, it does sound like there is an excessive load across the ...
Maybe a bent lead on the ram, shorting itself? I agree with Andy. The guy didn't fix it right. ... -- .sig -Chromatest J. Pantsmaker http://www.chromatest.net...
I made a buy on a good quantity of the memory chips for polysix. Also know that these are used in some Yamaha products and I'm not sure what all. TC5514APL-3...
Really? I deal with Jameco all the time. I scoured them and other venders and found no such thing. What's their part number? If they are manufacturing...
... I can measure if need be. But I have a couple for sale I think. The corner of the surface that they set in got melted by someone smoking something pretty...
This is great news !! Sent from my iPhone On Mar 7, 2009, at 10:11 PM, "Robert Weigel" <sounddoctorin@...> wrote: Really? I deal with Jameco all the...
PS I should have said just bookmark the sounddoctorin.com synth resource page if you haven't already. The 'parts' link there has the parts that I currently...
Well the first unit appears to be all working properly. I had to skin one contact a bit since I got some shorting where I had to tap the key to make it stop...
Hello guys, sorry for the late response... First of all, I forgot to mention that I know almost nothing about electronics and schematics, and I also need to...
Hi Milan, This is always going to be difficult if electronics isn't your speciality, so do not get too hung up about it. I find this mixture art and science is...
After staring at it for a minute, it looks like the SRAM IC is in correct to me. I can vaguely make out a "pin-one" notch at the end of the IC towards the...
Ha! That's why I wanted a larger picture as I couldn't make it out. You have to admit it does look like the pin 1 dot at the wrong end, but this would mean the...
Thank you for this quick response, guys. I vaguely remember the technician mentioning this red goo being insulation, I'm 99% certain that that's the case. Do...
Milan, Can you just verify for us the SRAM IC is located in it's socket correctly. Pin 1 should match the dot printing on the board itself. See my private ...
Hello guys, i've a battery saved polysix, now perfect working except a stupid problem: Every time i set a Patch, i have the Modulation ON, and if i want to...
Hi, Which patches are we talking about here? If you mean the factory ones, then yes, some have it applied depending on the patch selected. If you are saving ...
... I actually had this problem on the last one I sold. The solution wound up being to...cut the trace from the modulation line coming on to the cpu...
I have strange RAM problem. I've doubled memory. Added second 5514, soldered pin to pin except pin 8. connected 10k from pin 18 to pin 8 in both ic's. also...
Ouch, my eyes, see how they burn! If you have the specification for the new LEDs you wish to use (the ones originally fitted are 470R, which equals 11mA) then...
I love bright leds :D look here... I've made multicolour wheels http://www.jeanmicheljarre.pl/radek/studio/Korg%20Polysix/polysix%20modwheel%20test%20001.jpg ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
