Hello hey I got a roland ef303 grove effects box and hook up to the polysix it has phase reverb delay hifi and the best thing is it has a sequencer and a thig...
maybe the poly 800 one fits into the poly 61. ... From: "Olaf" <olgu@...> To: <PolySix@yahoogroups.com> Sent: Sunday, June 13, 2004 11:32 PM Subject:...
I have a Poly 61 for parts. Can sell the joystick for EUR50,00 shipping included. Best regards Jose Portugal ... From: "BrainSlayer" <brainslayer@...> To:...
yes, thanks, maybe. I'll check, I have a Poly800, too. But then I have a Poly800 without joystick ... ;-) But you're right, sometimes there are spare part...
Hi, I just got the chance to compare the Legacy Poly6 VSTi to the original synth. I listened to a few different programs, using about the same settings on both...
I never compared the legacy with the original one, but i compared 2 polysix synth's. Both are slightly different too. I had an older version with the old voice...
I haven't looked into the issue yet, but I figure I'd start here by simply asking. One of the voices goes sharp. I repaired this PolySix at the beginning of...
i have the same issue on one of my both synths. voice 5 has another sharpness. all what i can say. i changed all IC's, but the same effect. i guess some...
I think I have a later revision board IIRC. I think my issues may be separate. It seems that after the PolySix has had time to "warm up" the sixth voice...
Okay, bizarre. Turned it on tonight and no problems. It's noticably cooler and dryer tonight in the studio. Condensation + heat + old synthesizer = ? ... be...
I need two things for my Polysix: 1) plastic part that surrounds the mod and pitch wheels 2) top metal plate (where the pots are) These are not available from...
Hello Francois !!! I could sell You my plastic part that surrounds the mod and pitch wheels If You give me a fair bid for it. It’s condition is like new. ...
Here's the run down. There is no manually controllable pulse wave. The saw works as does the PWM, but when I select the normal Pulse wave the width, somehow,...
Please check the both IC's too. If one of these are damaged, you get the same strange effects. As I started with repairing my polysix I had the same strange...
Hi all, many thanks for your tips. Today I got my spare parts from Korg: 6 EUR for the part, 9 EUR for shipping. @ José: Good idea to send it directly to me,...
Is it possible to trigger the arpeggiator from a PC soundcard using a standard audio signal? I'm using a Quattro soundcard, sending a drum loop (audio, not...
the need a 5 V signal. i guess the soundcard one is too low ... From: comraderecords To: PolySix@yahoogroups.com Sent: Friday, July 16, 2004 3:02 PM Subject:...
... By sending it just a kick drum at a constant level (rather than the whole drum track as I was trying before.) So, I just programmed the kick drum in...
Yeah, so, I started getting signs I needed to dive back into the 367 and do some follow-up work. I replaced IC30 with another 74LS08 and did a few things...
I think I may have found my own answer here: http://launch.groups.yahoo.com/group/PolySix/message/204 But, again if anyone has any ideas I'm all ears. ... 367 ...
For the love of Pete. The distortion is still there. FWIW, it actually sounds more like something osciallating at a high frequency. I went through and...
That sounds like what my P6 is doing too - like the mod wheel is fully on. Everything is 'bubbling'. I have found that the PWM width control seems to have the...
sounds like a lfo problem ... From: reidar@... To: PolySix@yahoogroups.com Sent: Monday, July 19, 2004 1:47 AM Subject: Re: [PolySix] Son of a b**** ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
