what I want to achieve: take a clock trigger out from one (non-banana) modular system and use it to drive several trigger ins on a serge system simultaneously...
that's the beauty of a Serge. . you can do that sort of stuff. I'm sure others will give you a more technical answer with some caveats but that's the short...
ah, yes. I should have thought this through before posting. I suppose any time you mult from one output to several ins, you are connecting all the ins...
Hi Matt I was interested in this question and finally got around to testing it myself. I found that I can make a 16 step sequence out of the 8x2 by simply...
Hi John, I had the same experience with all of my ACPRs, actually, and determined that it was helpful to 'buffer' the pitch CV by putting it through the INV ...
Hi Matt I'm not sure I understand the fix you suggest, unless you were having a different problem. Is what you are saying is patch the ACPR to the INV then to...
Yes, what I said was for a different problem. I just tried what you suggested and had the same 1/2 step sharpness at 12:00 and then the same effects with a...
re changing the reset points: I'm afraid that the only option I know of is to push buttons; but then again, I have to do SOMETHING. As for my ACPR "problem",...
what do you mean. ."stops"?. The only time mine ever stopped was when i accidently blew it up with a 18v. input spike. nice. hahaha jd ... From: amnesia...
no, Ross is right. my (variatons of, like the VC timegen Clock) DTG stop too, some times, and i also have to flick the switch to get them back in running mode....
If you run the DTG 'too fast' it might lock up and stop oscillating. Is this what you're talking about? I think in order to do that you need to put some...
uh. . no. it's not normal. the DTG will cycle unless you patch program it to stop. mine never stopped. I had eight or more of them and i would leave them...
Mine will stop if I push their rate too high with a CV or modulated by themselves to adjust curve, I think this is normal. However, mine won't ever stop if I...
Hmmm. . can't remember if i ever tried that. I do remember that i was manualy forcing them into the audio midrange constantly while recording HC. . .maybe...
My experience generally agrees with John's, with the exception of noting that there does seem to be an upper boundary on the frequency at which the DTG can...
obviously, some tqeeks have been made and its normal for the right cell of my VC timegen clock and VC timegen osc. i guess that's why your DTG never stopped,...
of course, most of the time, they will not stop if you just set them to run and no changing vc input is put in them. Bakis Sirros - Parallel Worlds /...
obviously you are using yours different than how i used mine. Also, I have no experience with the new "M" class so i'm out of my water depth. Seems like James...
Mine top out at 2.3kHz without any modulation. I can push them with mod and they will go to around 3.7kHz. Around this point, they either refuse to go higher...
Okay, I snooze off and John pokes me with a sharp stick. LOL! :) here's my two cents. I've had things "stall" before if there was a ton of mod going on, ...
Is it safe to take multiple GATE outs from the TKB and combine them at a single input such as a Variable Q VCF's TRIG IN, if the GATEs are never firing...
I guess so.. There shouldn¹t be any danger in combining the GATE OUTs of each step (since you cannot, at least to my knowledge, have more than one step active...
Thanks for your reply, Yulian. I've been in touch with Mr. Tique who said that there's no harm in doing this -- I won't 'break' anything -- but that I could...
hello, a new Serge M-odule has been released! it is the Wilson Delay M-odule and it costs 2250 USD. it includes: the Wilson Analogue Delay module, a Dual...
That's great! The WAD is one of my very favorite Serge Modules, especially for all the things that a digital delay does NOT do. ;-) ... PRO, and an XFader. ......
I've got a '78 Serge Panel looking like this: http://www.xs4all.nl/~srroekel/SynthiSergefront.jpg It works pretty well, my technician had to fix the wave...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
