hi, not that it is any help but i have an mks 50 hooked up and it seems to follow sys ex info from my bcr fine..so get help from the techo guys here and i am sure you will be on your way..soon..The way i did it from memory was teaching the bcr each parameter i wanted to change though..
good luck BAÂ
----- Original Message -----
From:
bc2000@yahoogroups.com
To:
<bc2000@yahoogroups.com>
Cc:
Sent:
Tue, 14 Feb 2012 17:38:05 -0000
Subject:
[bc2000] Re: newbie
Â
Hello Mark, thanks for the quick reply
yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3, the second 0 to 3, the fourth 0 to 5 the fifth 0-127.... and when i move them i can see the leds and the value change in the bcr display, definitely it seems that is working ok but the mks doesnt do anything... (i.e. the first encoder is the dco range so i should hear a change in the sound)
Regards,
J
--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroupscom, "peterobrian@" <peterobrian@> wrote:
> > then go to presets and import my mks50 sysex file, OK, i can see the preset, then i go to midi/send and the bcr200 start to blick, it seems that the presets has loaded ok in the bcr hardware....
> > but now when i move encoders on the bcr the mks doesnt do anything.... if anyone could tell me what im missing or if im doing something wrong... thanks in advance...im getting a bit mad :)
>
> When you move the encoders, do these encoders (and the BCR's display) respond as intended?
> You should realize that when moving the encoders you're always working with the BCR's "temporary" preset (a.k.a. "preset 0").
> See questions 43-45 (pp. 94-95) in the FAQ section of BC Manager Manual.
>
> Hope this helps,
> Mark.
>
HI Guys first time here first time anywhere yahoo land. Listen i was brought up on analog tape and outboard synths I bought this bcr 2000 so i could use it to...
So for instance...do i run the bcr in usb or midi mode when using bc manager ?? I simply want to take the mks-50 preset ..transfer it to the bcr2000 and then...
OK SO I NOW HAVE SOLVED A LITTLE ..I now have the bcr on usb 1 mode and its talking to bc manager as I can test hardware and all the lights flash and...
Hi, You can use BC Manager in USB or Standalone mode but Mark recommends use U-4 mode for USB and S-1 for Standalone to avoid problems. Best, Alex 2010/12/14...
Hey alex..thanks so much for your reply i was beginning to feel out on my own in yahoo land..Listen i have got the bcr talking to my mks 50..I wouldn't say i...
Hello everyone, need some help setting up my bcr2000 to talk with my mks-50 using BC Manager. Here's my studio configuration: -computer -midi keyboard usb to...
... When you move the encoders, do these encoders (and the BCR's display) respond as intended? You should realize that when moving the encoders you're always...
Hello Mark, thanks for the quick reply yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3,...
... OK, then it's probably a totally different problem. Maybe you can verify that the BCR actually sends the intended MIDI messages: E.g. in BC Manager, from...
Hello, i've verified that the expected midi messages are sent as can be seen in the image http://oi39.tinypic.com/zlwxzt.jpg also i have connected the mks...
... Whenever the BCR is in a U-mode (U-1/2/3/4), the BCR's OWN output (such as the messages intended for the MKS) goes to the USB cable and from there to...
Hey Mark! that works! so i load the preset into bcr then i change to s-1 mode and thats it, i move the encoders and mks responds just right :) thanks for your...
And thanks to all that helped too, now that i know how to interconnect the bcr with my hardware synths, im going to make (or at least try) an oberheim matrix...
Sorry Lem, not me. But what is it you want to do? I'm sure it'll be doable somehow. Kieran Sent from my iPhone ... Sorry Lem, not me. But what is it you want...
hi, not that it is any help but i have an mks 50 hooked up and it seems to follow sys ex info from my bcr fine..so get help from the techo guys here and i am...
Hello yatlabatla, i guess you are using a mks50 software editor and the bcr, and you have midi learnt every parameter of the editor to map to the bcr, thats a...
Last news, i have reinstalled the usb midi driver and now instead the bcr2000 port 1/2/3 i have just 1 port called BCR2000 , so i have configured bc manager...
At this point I would record some automation into cubase. Then check all the midi settings are correct in cubase and try and get that automation out to the...
Hello! is there a way if you have a hardware synth connected to the bcr, the synth send the value of a parameter and the led in the bcr goes to the position of...
... First of all, of course the synth must be able to send its parameter values: either the whole bunch when you select a synth patch, or an individual...
Offline 
Send Email