Hello, I had the same problem recently. I'm not sure how to solve it and what caused it, but I have reinstalled the drivers again a few times, until the...
Hi guys, Sorry to labour the point but still haven't got any further with this (see my queery on this topic below). Can anyone please help? Apologies for being...
Hi, I am a beginner in midi programation. I am not a native English speaker, so I hope I can adequately explain. I want to know if is there a way to use the...
Hello, I'm a new member - I recently acquired a bcf2000 and I plan to use it to control DAW software (Reaper and Cubase mainly). Reaper users have their own...
Hi all - First post here, I'm so glad I found this group (Jerome of espace recommended it ...) I've just ordered a BCF-2000, for use in Cubase 6. By way of...
Hi all I'm new to the group, just recently received 2 Bcf's via mail and I was super excited. Although I've been using DAWS forever I've never had anything...
... You don't need bcf2000_1-10.zip (the firmware) and Update_Utility.zip (unless your BCF2000 does NOT display "1.10" during startup). And you don't need...
... Hello Mark - THANK YOU! You have saved me hours or work, fruitless at that. I'm SO grateful! Re: your MIDI Tools vs BC Manager vx. BCFview - where can I...
You can get them here: BC Manager <http://home.kpn.nl/f2hmjvandenberg281/bcman.html> MIDI Tools <http://home.kpn.nl/f2hmjvandenberg281/miditls.html> Cheers! ...
Anyone use a bcf successfully w digital performer? My plan is to get 3 working together so I can have 24 faders. However I can't get even one to work with dp....
... There are 2 types of Mackie display messages: 1. Display messages sent by a computer program (Reason, Sonar, etc.) TO the Mackie (or in our case: a BCF2000...
Hello everyone, need some help setting up my bcr2000 to talk with my mks-50 using BC Manager. Here's my studio configuration: -computer -midi keyboard usb to...
... When you move the encoders, do these encoders (and the BCR's display) respond as intended? You should realize that when moving the encoders you're always...
Hello Mark, thanks for the quick reply yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3,...
... OK, then it's probably a totally different problem. Maybe you can verify that the BCR actually sends the intended MIDI messages: E.g. in BC Manager, from...
hi, not that it is any help but i have an mks 50 hooked up and it seems to follow sys ex info from my bcr fine..so get help from the techo guys here and i am...
Hello, i've verified that the expected midi messages are sent as can be seen in the image http://oi39.tinypic.com/zlwxzt.jpg also i have connected the mks...
Hello yatlabatla, i guess you are using a mks50 software editor and the bcr, and you have midi learnt every parameter of the editor to map to the bcr, thats a...
Last news, i have reinstalled the usb midi driver and now instead the bcr2000 port 1/2/3 i have just 1 port called BCR2000 , so i have configured bc manager...
At this point I would record some automation into cubase. Then check all the midi settings are correct in cubase and try and get that automation out to the...
... Whenever the BCR is in a U-mode (U-1/2/3/4), the BCR's OWN output (such as the messages intended for the MKS) goes to the USB cable and from there to...
Hey Mark! that works! so i load the preset into bcr then i change to s-1 mode and thats it, i move the encoders and mks responds just right :) thanks for your...
And thanks to all that helped too, now that i know how to interconnect the bcr with my hardware synths, im going to make (or at least try) an oberheim matrix...
Sorry Lem, not me. But what is it you want to do? I'm sure it'll be doable somehow. Kieran Sent from my iPhone ... Sorry Lem, not me. But what is it you want...
Hi, I see a lot of attempts documented on the board with "will post it as soon as I'm done" written in them, but no final posts of a BCR preset. Anyone out...
I have a matrix 6r ..i did do a very basic editor..however being more of an analogue tape guy and not computer  guy i think you may find my editor quite all...
