I have a Roland JW50 workstation keyboard. The floopy drive (model#FZ-354)has difficulty loading disks. Someone told me just to replace it with a regular...
I went to my local music store which is the only authorized repair center for Roland in my area. They told me that the part is no longer made (floppy...
Hello, my name is Peter. I´m from Germany/Aachen. I own an Alesis QS8.2 and QS6.1. The QS6.1 is humming at 50Hz (or 100Hz) with a little amplitude, that is...
Hi. If the regulator is getting too hot then too much current is being dragged through it or the regulator itself is faulty. Trace the line connected to the...
John Brewer
member@...
Jan 14, 2006 8:34 pm
53
Thanks, for the hint. I will have a look at it. You will hear from me again. Regards Peter. "John Brewer" <member@...> schrieb: Hi. If the...
Hello Joseph, I repair keyboards like Casio, Roland etc... About Alesis Synth... I do not know this model but-> Check all electrolytics in the power supply. Or...
noelbuhagiar
noelbuhagiar@...
Jan 19, 2006 10:11 pm
57
Hello friends, Just joined the group. I have an ensoniq EPS - does anyone know where I could get a SCSI external drive for it? Thanks Noel...
Hi Noel. I am trying to get a replacement 3.5 floppy drive for my Roland JW50 keyboard workstation. I have asked my local dealer, but they would have to...
Hello. I am new to this forum. I have a question about my Crumar DS-2. It has a rather low output level in the "High" out jack, and if I hook it up to a preamp...
Hi everyone! A friend of mine (whose birthday's around the corner) is fond of vintage synths (Roland JX-3P, SCI Pro-One, etc) as well as digital synths (Roland...
maschinengeist001
maschinengeist001@...
Feb 2, 2006 4:15 am
61
The screen failed and i cannot see anything! ¿does somebody where i can purchase a replacement? Thank you!!!...
Bened
benlukstardust@...
Feb 6, 2006 9:02 pm
62
Are you sure it's not just disconnected in some way ? Otherwise you might want to contact Roland, i know i can buy a replacement disk drive from my mc500,...
Hi I have Roland xp-80 keyboard, accidentally bulb fell on its black (Sharp keys) and burnt them. I want 2 black keys. Can u help me or atleast give me the...
sumitkhajuria
sumitkhajuria@...
Feb 9, 2006 1:44 pm
64
if there its some light in the floppy drive maybe its just to replce the belt.............................
I plugged it in at next thing you know bam screwed over, I had only bought it like just long enough prior so the friggin 30 day in store warranty at guitar...
I have a Roland JW50 keyboard workstation. The 3.5 floppy drive is not working. I went to an authorized Roland repair center and they checked with Roland and...
1. Have you tried to contact Roland directly to see if they can provide the part ? (just in case) 2. Try contacting these guys : www.route66studios.com ...
have you tried drives from the dj 70 or the s series samplers? it wouldnt suprise me if there was an editor/librarian that you could use via your puter....get...
andysine@...
Feb 28, 2006 11:37 pm
70
I called Roland and they told me the part is no longer made. They said I should look on e-bay for a used JW50. I did that for the last few months including...
I am told there are no programs or editing software that would work. The only other Roland that I was told might read the disk file format is the MC50. ...
I have a broken Kawai k5000s. The operating system will not load, all I get on the LCD screen showing the Keyboard title. I've tried to re initialise it, I've...
tim_auvache
tim.auvache@...
Mar 8, 2006 3:46 pm
73
I have two studiologic controllers. Neither of them work even though I changed out the main board in one. What other kinds of things go wrong with such a...
michael
michaelkillick@...
Mar 27, 2006 2:25 pm
74
Hello all I'v got a Roland JV-35 and I used wrong power adapter instead of the Roland adapter and now the thing wont turn on. I've opened up the keyboard and...
Hi Alex, Sorry about your accident. This is general advice as I do not know the JV-35 but it may help sort out what has happened. Look at the label on the...
