Hello, my name is Peter. I´m from Germany/Aachen. I own an Alesis QS8.2 and QS6.1. The QS6.1 is humming at 50Hz (or 100Hz) with a little amplitude, that is...
52
John Brewer
member@...
Jan 14, 2006 8:34 pm
Hi. If the regulator is getting too hot then too much current is being dragged through it or the regulator itself is faulty. Trace the line connected to the...
53
finken.hp@...
pinkhape
Jan 15, 2006 10:40 pm
Thanks, for the hint. I will have a look at it. You will hear from me again. Regards Peter. "John Brewer" <member@...> schrieb: Hi. If the...
54
joseph kiwanuka
josmosug
Jan 16, 2006 4:49 pm
Hello, am joseph i need your help , do you repair all the keybaords, like yamaha, and casio , and others ? do you have spare for them?. ...
55
finken.hp@...
pinkhape
Jan 17, 2006 7:39 pm
"joseph kiwanuka" <josmosug@...> schrieb: Hello, am joseph i need your help , do you repair all the keybaords, like yamaha, and casio ,...
56
noelbuhagiar
noelbuhagiar@...
Jan 19, 2006 10:11 pm
Hello Joseph, I repair keyboards like Casio, Roland etc... About Alesis Synth... I do not know this model but-> Check all electrolytics in the power supply. Or...
57
noelbuhagiar
Jan 19, 2006 10:50 pm
Hello friends, Just joined the group. I have an ensoniq EPS - does anyone know where I could get a SCSI external drive for it? Thanks Noel...
58
iamthepianoman@...
imamrniceguy
Jan 20, 2006 12:19 am
Hi Noel. I am trying to get a replacement 3.5 floppy drive for my Roland JW50 keyboard workstation. I have asked my local dealer, but they would have to...
59
romannis_motte
Jan 26, 2006 6:37 pm
Hello. I am new to this forum. I have a question about my Crumar DS-2. It has a rather low output level in the "High" out jack, and if I hook it up to a preamp...
60
maschinengeist001
maschinengeist001@...
Feb 2, 2006 4:15 am
Hi everyone! A friend of mine (whose birthday's around the corner) is fond of vintage synths (Roland JX-3P, SCI Pro-One, etc) as well as digital synths (Roland...
61
Bened
benlukstardust@...
Feb 6, 2006 9:02 pm
The screen failed and i cannot see anything! ¿does somebody where i can purchase a replacement? Thank you!!!...
62
xonox
djbusta1000l...
Feb 7, 2006 12:17 am
Are you sure it's not just disconnected in some way ? Otherwise you might want to contact Roland, i know i can buy a replacement disk drive from my mc500,...
63
sumitkhajuria
sumitkhajuria@...
Feb 9, 2006 1:44 pm
Hi I have Roland xp-80 keyboard, accidentally bulb fell on its black (Sharp keys) and burnt them. I want 2 black keys. Can u help me or atleast give me the...
64
Master
tercera_cuerda
Feb 21, 2006 5:19 am
if there its some light in the floppy drive maybe its just to replce the belt.............................
65
Master
tercera_cuerda
Feb 21, 2006 5:26 am
66
wolfenstein2386
Feb 28, 2006 3:28 am
I plugged it in at next thing you know bam screwed over, I had only bought it like just long enough prior so the friggin 30 day in store warranty at guitar...
67
imamrniceguy
Feb 28, 2006 7:41 pm
I have a Roland JW50 keyboard workstation. The 3.5 floppy drive is not working. I went to an authorized Roland repair center and they checked with Roland and...
68
xonox
djbusta1000l...
Feb 28, 2006 10:34 pm
1. Have you tried to contact Roland directly to see if they can provide the part ? (just in case) 2. Try contacting these guys : www.route66studios.com ...
69
andysine@...
Feb 28, 2006 11:37 pm
have you tried drives from the dj 70 or the s series samplers? it wouldnt suprise me if there was an editor/librarian that you could use via your puter....get...
70
iamthepianoman@...
imamrniceguy
Mar 1, 2006 12:44 am
I called Roland and they told me the part is no longer made. They said I should look on e-bay for a used JW50. I did that for the last few months including...
71
iamthepianoman@...
imamrniceguy
Mar 1, 2006 12:49 am
I am told there are no programs or editing software that would work. The only other Roland that I was told might read the disk file format is the MC50. ...
72
tim_auvache
tim.auvache@...
Mar 8, 2006 3:46 pm
I have a broken Kawai k5000s. The operating system will not load, all I get on the LCD screen showing the Keyboard title. I've tried to re initialise it, I've...
73
michael
michaelkillick@...
Mar 27, 2006 2:25 pm
I have two studiologic controllers. Neither of them work even though I changed out the main board in one. What other kinds of things go wrong with such a...
74
vivalavirgenranchera
vivalavirgen...
Apr 8, 2006 4:18 am
Hello all I'v got a Roland JV-35 and I used wrong power adapter instead of the Roland adapter and now the thing wont turn on. I've opened up the keyboard and...
75
John Brewer
johnx66uk2003
Apr 8, 2006 10:19 am
Hi Alex, Sorry about your accident. This is general advice as I do not know the JV-35 but it may help sort out what has happened. Look at the label on the...
76
Alejandro Quintanar
vivalavirgen...
Apr 8, 2006 4:09 pm
Thanks John, Let me try do dig out the power adapter that did the damage. It happened a while ago and I just haven't gotten around to try to see if I could...
77
John Brewer
johnx66uk2003
Apr 8, 2006 4:36 pm
OK Alex, I will keep a look out for your post. John. ... From: "Alejandro Quintanar" <vivalavirgenranchera@...> To:...
78
sensea36
sensea36@...
Apr 9, 2006 11:37 pm
I'm not sure when this happened. Maybe when i plugged my output expander in, or just because I left it on overnight, maybe i overloaded the sample inputs...
79
thejunkyardcatalyst
thejunkyardc...
Apr 14, 2006 2:09 pm
Hi. Let me know if this is the wrong group to ask such a question. Thanks. thejunkyardcatalyst...
80
joseph kiwanuka
josmosug
Apr 18, 2006 7:18 pm
Hello, am joseph, it seems you know so much , about repairing of key boards. now do you have parts for yamaha s , PSR, and roland , eg Xp80,...
