Well, if you could take samples with Emax at both 42 and 44 KHz you probably
wouldn't hear any difference. But converting 44.1 Khz samples is another thing,
because any samle rate conversion results in a degradation of quality.

I did some testing yesterday with drum samples that I either played back and
sampled at 42 Khz or converted from 44 Khz to 42 Khz using EMXP, and the
difference was quite radical! For example, the 909 bass drum sample I converted
was quite distorted (the original is normalized at -0.3 dB). On the other hand,
when I sampled it manually it sounded really good. Also, converting hi hat
samples with EMXP added a lot of low frequencies that are not present in the
original. Again, manually sampling them gave better results.

Do you know if the .wav files I want to convert with EMXP should have some
headroom for better results?




--- In emax@yahoogroups.com, "esynthesist" <esynthesist@...> wrote:
>
> In fact EMXP never allows samplerates higher than 41667 Hz for Emax-1.
> I wanted to be sure that the banks would be compatible with all Emax-1
samplers.
>
> The maximum samplerate at which Emax-1 can sample is 41667 Hz (Emax-II even
only 39 kHz)
> As far as I know the option to change the samplerate to 44100 Hz on Emax (in
the Digital Effects section) was only added for SE versions. I only have an SE
and Plus version (which both support playback at 44100 Hz), so I couldn't test
if non-SE versions are also able to playback samples at 44100 Hz.
>
> If someone can confirm that ALL emax-1 samplers support playback at 44.1 kHz,
I might change EMXP. If not all Emax samplers are compatible, I could still add
the 44100 Hz option in EMXP "on user's risk" :-)
> But... does anyone hear the difference between 41.7 and 44.1 kHz samples on
the Emax ??
>
> ///E-Synthesist
>
> --- In emax@yahoogroups.com, "jammie" <jammie.emma@> wrote:
> >
> > it might be that to get all samples to fit in the emaxs memory that a bit of
sample rate is lowered
> > ----- Original Message -----
> > From: bermudaben2006
> > To: emax@yahoogroups.com
> > Sent: Saturday, July 11, 2009 2:46 PM
> > Subject: [emax] Converting wav files to Emax samples using EMXP
> >
> >
> >
> >
> >
> > This is a question for esynthesist or anyone who uses his software:
> >
> > Why does EMXP convert my 44.1 KHz wav files to 41.7 Khz Emax samples,
given that Emax supports sample rates of up to 44.1 Khz?
> >
> > Thanks,
> > Ben
> >
> >
> >
> >
> >
> >
> >
------------------------------------------------------------------------------
> >
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG - www.avg.com
> > Version: 8.5.387 / Virus Database: 270.13.10/2231 - Release Date: 07/11/09
05:57:00
> >
> >
> > [Non-text portions of this message have been removed]
> >
>