I bought new-old-stock one early this year to place into my S900. I found the vendor thru google. If I can find the receipt, I'll give you the store name. But...
Hi All, I have a bit of a long story, so I'll give you the short version. I decided to sell my EMAX Rack, shipped it out, it arrived DOA, buyer returned it,...
Found this on http://www.silveriafamily.com/emax/emax_repair.html#fd Floppy Drive: the DS/DD floppy drive of the Emax and Emax II is not a standard PC floppy...
Although not the same drive, I recently replaced the floppy drive on my EIII keyboard. I called Teac: DSPD Parts Department: voice: (323) 727-4840 fax:...
Correction, actually it was the same drive (Teac FD235HF-A529, so Teac still has them in stock, bought it about a month ago, was under $40 with shipping.. ... ...
Hello everyone. I have an odd situation at hand and I'd like some assistance if possible. The other night I was running my MC-202 off the clock output of my ...
The DX7 case is earthed. The emax was driving its clock output into the cable whose tip touched the dx7 case (or the tip & sleve both touched it, similar...
Can you see the message on the LCD for the SP-12? If you can, Go to Setup and perform a CLEAR ALL MEMORY, CLEAR ALL SOUNDS. Check it that brings your sounds...
Hello again everyone. I cleared the memory and sounds on the sp-12 and still nothing. This unit functions perfectly but as stated before, there is no sound /...
... I don't expect it's the power supply that's blown. But I don't know the circuitry of the clock driver, so haven't got much idea on what is in line with...
Can i make a sugestion? If you guys have electrical/electronic/general problems with synths and samplers try joining at http://www.vintagesynth.com/ They have...
Hi everyone, I'm french so please excuse my english ;-) Does anyone of you know where I can find an emax electronic schematic? I bought an emax that does not...
well.. I replaced the fuses and it didn't change anything. All the leds still light and I get the black bar across the screen with no drive activity. Any...
Due to a major bill, like the vans done its engine in. Im sadly going to have to part with some of my gear including my Emax SE, boxed with manuals and about...
... Peter, I am wondering if you had any better luck with this. I am in the same boat and have tried everything in MS-DOS. I am not sure if I am experiencing...
Shame your in Canada, and im in the UK, the sampler im selling is a SE and i have 150 discs with it all have the oS on them and i could have sold you one of...
Hi gang, I'm looking for the ribbon cable that connects the CPU board to the analog output board. One end is a standard black IDE style connector, the other...
Hello, Sorry for taking so long to reply to this thread, I had not realized it was still in progression! A very kind person from this group has created me a...
Peter, Yes. I need a copy. I just scored an SE rack with the blue SCSI connector on the back. I believe the Plus OS would be required at some point before I...
the regular emax has a small blue connector that isn't scsi but some rs-232 connector or something, If you have a wide scsi connector on it then I'd love to...
Elmacaco, You are right. There is no wide SCSI connector present. So this unit does not have SCSI interface. So I only need to upgrade from Emax 3.2 to SE....
If it's a SE unit wouldn't it already be upgraded? just need SE os and you should have those functions. ... From: Jip Harrio To: emax@yahoogroups.com Sent:...
Everyone in this thread---- if the blue connector you see is this one (I put into my keyboard from a rack unit - see attached picture), it IS a SCSI port....
E-man, I beleive you are right. A disk that I came across had OS 3.2 on it. I continued the effort of properly downloading the SE 1.1 and have just about...
Ted this is good news. I have a zip drive so I am going to work now on uploading O.S. Plus and then try the zip to see if I can get it to work. I will post the...
Yipee Yahoo... I finally got it. Thanks to this forum because without it, I would not have had a clue. It took a lot of trial and error but I am glad I hung in...
Peter, If you are running Emax 3.2, you will have to upgrade to SE 1.1 before you can move up to the Plus OS. So I think you would need the loadup the seup.em1...
I just upgraded from OS 3.2 to OS SE 1.1 and then OS SE Plus. Now when I decided to sample a sound, I cannot because each time I attempt to use the "Sample"...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
