Highly recommended upgrade. I got this kit and made an attempt to install it myself. Which I did do, but not quite successfully. I had some challenges because...
Donovan, You should contact Ted Summers and see if he might have anymore in supply. I think he was getting low but still had at least a couple. Reggio...
Today I checked if MIDI SDS is working fine on the Emax-I. And it does. But the samples must be in 12-bit unsigned format. I don't know if C6 or any other...
... the emax driver it sends it via sysex in pcm 12bit format this program also sends to the emulator 3 and eos via scsi to ensoniqs and korg dss1 and dsm1...
Hello Esynthesist, Thanks for this good new ! I could not do the test myself : I have no more soft at this time in the Mac able to save samples as 12 bits ...
Sound great, this Sample Wrench software. But am I right that it still costs between USD 99 and USD 149 ? Or do you know of a free version which is not limited...
If you want some help in finding the problem with the panning, feel free to e-mail me one of those Emax-II banks and I will have a look too. My e-mail address...
SCSI upgrade has nothing to do with the Mac connectivity that I am aware of. I don't think Emax 1 has SCSI dump. The SCSI upgrade will allow you to: 1) Boot...
Hello Ted, Thanks for your answer. My Emax1 is a SE HD, and already have a hard drive. Would the upgrade permit to have a second one or an extra strorage (Zip...
Maybe someone on the list can help me here. So I got a new floppy drive working (thanks Ted) on my Emax and I'm *just* now getting around to using EMXP and...
that could be... but it's like this on all the presets. i had the bank called Synth Factory loaded up and i couldn't get any preset to play 8 voices (seemed...
If your Emax is SE HD, you do not need an upgrade. To utilize a second external drive you need: Plus OS 1.0 to boot from External adapter / connector for the...
Hello Ted, Thanks for your answer. I shall open the Emax1 for the first time (in more than fifteen years) tomorrow. Best regards Poumpoumchak ... [Non-text...
okay, i've confirmed now that i'm only getting 3 note polyphony. loaded up my own sample, not a dual voice preset, no chorus, and if i play more than three...
... or the sample and hold chip is playing up these are 2300 ic if it is these upgrade to smpo8 as these are the replacement and have a faster slew rate equals...
Another idea might be if those ICs are socketed on the analog board, to move a working voice to a non-working section and see if that voice now works. That...
Thanks Jammie... BTW, Is the smp08 a replacement for *both* the VCA/VCF IC *and* the sample and hold chip? Is the VCA/VCF and sample/hold all on one IC? I'm...
Hi Group- I just bought an Emax II. Are there free samples available on the web? How can I transfer the sounds... I own a scsi cd rom drive and a scsi zip...
... right there are 4 2300 sample and hold multiplexers they have 8 channels 1 for each voice of polyphony 1 2300 deals with the filter cut off envelope 1 2300...
After that, it might be a little while before they become available again. I can remove the items from ebay if people here want them..... $50 here compared...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
