Hey all, just thought id post the sale for my mint 777. Its is the first gen with the purple/blue face plate. It is all original and has never been opened....
With the 777, self oscillation refers to the filter set with a high enough resonance setting that causes it to ring, or generate a tone, to be used as another...
Is there a way to use my JX-305's sequencer to control when the 777 should kick on and off? I've tried, but when I press play on my JX's sequencer, the 777...
The 777 can only follow the MIDI start/stop commands of the external sequencer when set to external sync. You will not be able to press a note and have the...
I am new to producing my own music and was just looking for some advice on using the fr-777 with Reason 1.0; ideas, pros-cons. I have just purchased the...
I turned my 777 on last night for the first time in about 10 days- (been traveling) It was mad at me- The display get running the spinning 777's over and over-...
Reason 1.0 can't be used to sequence external gear. You'd either need to get Rewire and another MIDI sequencer to sequencer the 777 with Reason. Or maybe ...
Hi Jeff, Is there any chance the 777 received a good bump while it was being moved around? If so this may be the reason the scale and tuning to be off. I would...
No bump- It never moves- I did open her up and "rescale" and tune it- It seams happy now- Thanks! ps- nice work inside! very very clean and organized!!!! Jeff...
The following fr777 poll is now closed. Here are the final results: POLL QUESTION: Should the list be moved? CHOICES AND RESULTS - Yes, 8 votes, 72.73% - No,...
fr777@yahoogroups.com
Nov 1, 2002 8:32 am
315
Where's all the new patches? Anyone out there? Well, either way, I didn't post anything special, but I did add a patch in the Database section if anyone wants...
Hi Jered and all you guys, A few months ago I bought a used 777 over here in The Netherlands: a black model, OS 2. It looks absolutely fab! It sounds cool, de...
... I think now is as good a time as any to mention that test messages are not allowed on the list unless sent by an admin for configuration testing purposes. ...
Hi Wilco, Please check to see that the power supply you are using with the unit has the following specs: 12 AC output (not DC), rated at 1amp (or 1000mA). If...
Thanks! I will check it out in the next few days. ... From: Future Retro Synthesizers To: fr777@yahoogroups.com Sent: Wednesday, December 04, 2002 6:19 PM ...
Has anyone done any of the mods on the 777 page? Any sound samples? Does anyone know where I can get my 777 modded? I live in central California. Any help...
Hello, every 777 owners and lovers !!! I wanted to know if there are any dedicated web pages where we can get more dtailed explanations on HOW TO MOD our...
You will need some basic knowledge in electronics to perform the mods. It is necessary to be able to read component values as well as have some soldering...
Thanks for the answer... i guess i will not / never mod mine then... in France -- ... zero at this sort of stuff.... too bad... but still I am very happy with...
I was thinking about doing this mod, but with some minor changes. I'm not an electronics genius so I'm asking for a little design help/suggestions (I can...
Hi Andrew, 777 owners with serial numbered units 200 or higher should already have the ability to control the filter cutoff with an external CV. Plug the ...
Thanks Jered. I have #212 but for some reason the CV in doesn't affect the cutoff. It works on osc. freq. fine though. Maybe I have an older unit with a later...
... On the left side of the PC boards you should see some lettering indicating the board revision. The revision that supports CV control of the filter's cutoff...
Hi Group; It's been a long time since I cruised the Group. Just wanted to say that the 777 is One Instrument that radically changed my musical thought. It is a...
I run my 777 midi sync'd to Cubase and an old M2516 Tascam board. The cool thing I discovered was with the mute automation I can stop and start the 777 at...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the fr777 group. File : /anupac Uploaded...
fr777@yahoogroups.com
Jan 3, 2003 7:12 pm
332
Finally got to see skylab2000 perform live for the first time last night (or this morning rather...) - great performance. I think it was an MS2000 that he had...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
