I noticed the following behaviour: 1. I create a 4 beat loop for the kick (using Ableton), this sounds just fine 2. then I add OH (or any other instrument) to...
So my 888 used to work fine, it would receive midi notes and midi clock just fine. but after three weeks of not using the 888, the 888 all of a sudden stops...
Hello, is possible to hear filtered signal in phones connected to 999 HP output? I hear filter on Stereo outs, but in phones not, but if i turn knob on filter...
hello all, i jsut recently got an 888. i got a euro power supply with it that i cannot use. i have an older jomox 09 psu which is 12v ac instead of 10.5v ac. i...
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.55555 Transitional//EN"> <HTML><HEAD> <META http-equiv=Content-Type content="text/html; charset=gb2367892"> <META...
Hi all. I use an MPC 1k as main sequencer and send out midi to an elektron machinedrum and take the midi through from that in to my 888. All worked lovely...
Can anyone compile this feature in the firmware for the XBASE 999 or the new 888 firmware for the 999? Or does anyone know if this is gonna happen? Otherwise i...
Hi all, I was experimenting with using an external clock via "shift/cancel" and step 11, and then I turned it back to "INT" . When I press the start button, I...
looking for money or trade. interested in yamaha fs1r or jomox xbase888 wiard module is in prefect brand new shape jomox has seen some use but works perfect,...
I just can't seem to do anything good with the LFO's in my 888. Does anybody have any ideas what things they can be used for. I had thought they could be...
ok. i've been a fan of jomox from the start, but... i need a plug for my xbase. can anyone tell me where to get one? john van nest? juergen? please... my...
Hello, i sequence my xbase 999 with ableton live. Is it possible to control the length of my kick for exemple, with the length of the note in a midi clip. ...
I know this has been talked about a bit already but what are the advantages and disadvantages of each machine. I can only afford one and make techno/electro. I...
In the third column of SunSyn mod matrix, the top selection is labeled Control Elem. The manual implies that it has something to do with routing MIDI...
Hi Mark - starting a new thread... "Hey Paul you know I have sent it over twice from the US now, once when the ROM failed and the second time for the OS 2...
Hi all I have noticed that the SunSyn does not seem to be very reliable at handling MIDI CCs. For example, if I have a pattern generating 3 or so lots of...
Yes...finally....there are new OS updates available for the Xbase 888 & 999. XBASE 888 OS 1.12 05.07.2010 18:16 Bugfixes XBASE 888 : -1.09 Splitmode 2 -1.10...
Hi all, This new OS for 999 is really solved a lot of problems. But not all! I see some problems with MIDI volumes of OH and CH in new OS. If you play some...
my 999 don't want to boot... i put last os, with a tm1 interface, all was allright, transmit done, flash done, but each time i make the 999 on, i'm blocked in...
Hi, is it possible or planned for the future to control the filter in realtime? I could find it in the manual and I could find it in the machine. e.g. the...
Hi all, I'm noticing a volume difference on the 999 between the preset patterns / pushing the c-a instrument buttons, and trigering those c-a instruments via...
