Actually, I wasn't aware of that. It must have been what I did (everything is back to normal as of last night), but how did I do it/undo it exactly? Is it in...
583
John Van Nest
johnnyvn@...
Aug 1, 2000 2:27 pm
Yes, it's in the documentation. (Funny what you can learn in there!). I think you hold down "shift" and hit the Up button to toggle back and forth. Some...
584
Doug Singer
dougpsinger@...
Aug 1, 2000 3:34 pm
Yes, funny... I'll see if and how that changes the tempo/data knob tonight (stay tuned). Thanks for the help, John. Doug ... From: John Van Nest...
585
Michael Chalmers
msmonkton@...
Aug 1, 2000 3:58 pm
I have read the manual, and my xbase doesn't respond to midi as the manual says it should. I cannot get it to respond to the note on messages it asks for. Any...
586
James
kintama@...
Aug 1, 2000 3:59 pm
Thank you everyone for the feedback. I knew about all the positives, that is why I want to get it :-) It was the unresolved issues I was concerned about....
587
Paul Wagorn (Worldbid)
pwagorn@...
Aug 1, 2000 4:01 pm
Hi James: the jomox has 3 (!) extra tracks for external sound sources... so the answer is "yes" -paul ... From: "James " <kintama@...> To:...
588
Kintama
kintama@...
Aug 1, 2000 4:10 pm
ohhh I'm impressed ! I thought that was not 'in addtion too'. I thought you lost your drums when you used it for sequencing other machines. Nice. See I...
589
Stupid Octave Cat
soc@...
Aug 1, 2000 4:11 pm
... Hm. That's odd. Mine works fine, and I'm guessing so does that of nearly everyone else on here. Do you have it set to the correct midi channel? That...
590
Stupid Octave Cat
soc@...
Aug 1, 2000 4:16 pm
... James, I use an XBase 09 alongside an ER-1 and TR-606 for dedicated drum boxes. The ER-1 is absolutely the best partner for the Jomox available. While I...
591
rOman
r_stange@...
Aug 1, 2000 7:05 pm
Hi James. Just to let you know, when working live, I use the 3 midi tracks to drive my nord rack 2. It's a great combination. You'll love it!!! ... thought ...
592
John Van Nest
johnnyvn@...
Aug 2, 2000 12:42 am
Have you checked which midi mode the unit is in? Hit "shift" then the red button labeled "midi mode" and scroll up or down......
593
John Van Nest
johnnyvn@...
Aug 2, 2000 1:14 am
Just to let you know...the so called "limited" polyphony is much less of a limitation than you think...here's why... OK. You must remember with an XBase that...
594
David Bivins
dbivins@...
Aug 2, 2000 3:27 am
Understand, of course, that in the busy pattern described by John below, every one of the samples will cut each other off. So the claps on the 5th 16th note...
595
John Van Nest
johnnyvn@...
Aug 2, 2000 4:07 am
Well, yes, David is technically right when he says "every one of the samples will cut each other off", but I'm not sure in many cases that you'd hear it that...
596
Michael Chalmers
msmonkton@...
Aug 2, 2000 8:06 am
midi mode and midi channel are both set correctly. ... ________________________________________________________________________ Get Your Private, Free E-mail...
597
Jean Francois Sylvain
jfsylvain@...
Aug 2, 2000 2:27 pm
Hi there ! Love the box (xbase 09), thanks for making it. only problem is how do you change pattern in Bank no mode? Have I missed something? I really like to...
598
John Van Nest
johnnyvn@...
Aug 2, 2000 3:43 pm
Unless I misunderstand your question...if you're in Performance mode, you change drum banks by hitting the Up/Down buttons and change Patterns by hitting...
599
John Van Nest
johnnyvn@...
Aug 2, 2000 3:44 pm
So are you saying that you'd like to play the XBase from a computer and it is not responding to midi at all? J...
600
Michael Chalmers
msmonkton@...
Aug 2, 2000 4:00 pm
the xbase will start when i press start on the computer, and i've been using it in this way - programming songs or just using different patterns. but i cannot...
601
Jean-François Syl...
jfsylvain@...
Aug 2, 2000 4:14 pm
... ok, let me rephrase that :) While in performance mode and in Bank change mode (pressing up/down changes bank) how can I change pattern without leaving Bank...
602
John Van Nest
johnnyvn@...
Aug 2, 2000 6:53 pm
It will not respond to ANY note messages? Have you tried every single note on your keyboard? Low octaves? High octaves? JVN...
603
John Van Nest
johnnyvn@...
Aug 2, 2000 6:54 pm
Hit the different red buttons which correspond to Patterns 1-16, 17-32, etc......
604
Jean Francois Sylvain
jfsylvain@...
Aug 3, 2000 1:44 am
oh well, I guess it's not implemented that way. Funny that i'd be the only one to want that feature tho'. thanks for your time JF ... From: John Van Nest...
605
John Van Nest
johnnyvn@...
Aug 3, 2000 2:07 am
I'm sorry...perhaps I misunderstand...what are you trying to do? John Doesn't hitting the red buttons do what you want to do? Change Patterns and keep the...
606
Brana
vgavrilo@...
Aug 3, 2000 2:38 am
JF, outside of Bank change mode, you have immediate access to only the 16 patterns that are contained within that bank. So to move from pattern 18 to 24 (all...
607
Michael Chalmers
msmonkton@...
Aug 5, 2000 6:26 pm
Yes, I did think of trying that. ... ________________________________________________________________________ Get Your Private, Free E-mail from MSN Hotmail at...
608
John Van Nest
johnnyvn@...
Aug 5, 2000 6:51 pm
Michael... Wow that's weird. What is your serial number, which operating system are you using? When did you buy the unit? This might help me figure out what...
609
rOman stange
r_stange@...
Aug 7, 2000 1:36 pm
All of a sudden my Bass Drum(xBase 09 latest op system)has no low end to it!!!! The Pitch and Tune controls don't do anything. I have had this unit for...
610
Aaron Rosenberg
arosenberg@...
Aug 7, 2000 3:48 pm
Germany - AIRBASE TO CONTAIN IMPROVED RELIABILITY AND FEATURES Today, JoMoX Elektronische Musikinstrumente GmBH of Berlin announced that with third wave of...
611
DDJ/Freon
loving@...
Aug 7, 2000 9:12 pm
... hey...it's probally the "trigger transistor" (I forget the "Q"# maybe Q12...) anyway ..lookat the schematics...it's got tpo be that...is a just a "tick"?...
