Hi, I asked this question some time ago. I wonder if it's possible to combine internal and external singles in a multi, to make the sequencer access all...
... The only approach I can think of would be to copy the single patches you want to use from the external card into the K5's memory. From there you could use...
HI; IVE BEEN USING THE K5 FOR A WHILE AND NOTICED I HADNT USED THE PEDAL JACKS SINCE I BOUGHT IT SECOND HAND, DOES ANYONE KNOW WHAT KIND OF PEDAL TO USE ( IM...
Sustain (hold) pedal is just a mono 1/8 plug with a switch, but I don't remember if it's on when released or not. Expression is a 1/8 stereo plug with a more...
For the expression jack and the pedal jack i am using a Kawai V-20X and my sustain pedal is an older Yamaha sustain pedal(unfortunately it has no model number...
hi, today i received my k5m :) it is not in very good shape - the backlight is dead and the knobs are problematic sometimes - well it´s an old synth - i may...
Hi phono, congratulations for having a new passion. ;) At the files area here there is an editor iirc, if you read through the messages of this group you'll...
thanx for the info. i have a look at these editors later. how good are they with programming the harmonics and the envelopes? would you say an editor is faster...
We have pretty much all the known K5 editors in the library. (well, I think there might be one rare one we don't have. Very few K5's have working backlights....
hi ! i just tried to load some patches intoo my k5m. I am using MidiOX for sysex transfers. I can store my internal patches but how do i receive sysex data on...
hmm ok... i was told that it is possible to modulate the frequncy of individual harmonics on k5. so this was a disinformation then. however i think the k5 is...
1.Have Midi In of K5 connected to midi out of the interface. 2.Have Midi Out of K5 connected to midi in of the interface. 3*.Set the protect switch to off(rear...
hmm..somehow i have a problem with saving my patches also, i guess :/ storing internal patches / sysex dump: 1. in midiOx i enter "manual dump" 2. on k5 i...
just an update... i had no success sending or receiving sysex data from k5m! so far i tried to store my patches. and i tried to load sysex banks into it. the...
If you can't send all the patches, that's due to transfer going too fast. You should get up wait time / delay options if there are in MIDIox(There are in...
Thanx. Setting a delay time higher then the standart settings in midiox, did it! I now can receive sysex banks into my k5. But still can´t send k5 internal...
Hi klaus, i decided to continue to talk about the problems here, since others may have the same problems. so this could be a good info for everyone.... to...
Phono, The guys at this site helping you are great and have given you all the advice I know about. Also the K5 technical support from Kawai America is great....
Hi phono, ... I have no experiences with that version, so may be someone else who has, may have some suggestions for you. The only hint i can give is to do an...
ok. i am very thankful for your help! I hope i will find a solution for the sysex problems. i will have a call with kawai technican later this week - they have...
Use something besides MidiOx to do you sysex xfer - like Cakewalk, or another editor Librarian. The K5 requires an acknowledgement for every sysex packet, and...
For K5->PC transfer, If the K5 crashes, it might be a problem that requires to remove and replace the battery(Resets RAM, that might have bugs in it caused by ...
so may be someone else who has, may have some suggestions for you. Me, and I'm the first one to have sent suggestions to him(About all of the ones he...
SYSEX:
======
thanx for the summary..
i guess i have following options:
- replace the battery
- using a another (maybe "oldshool") sysex dump program
- change...
Hi Antoine i am sorry to hear that. There are some quad opamps, but the problem is that they must fit exactly and the risk to burst the K5 by trying out the...