HI! I decided to try out the Wave Analyzer to do some resynthesis. In ... You must have Windows 98 Second Edition or a later Windows operating system installed...
didobrain,
I ordered a pair of backlights yesterday (for my K5 and if my K2000
ever needs one.) Have you put yours in the K5 yet? Does it work?
--- In...
Hi Jo�o,
if you are actually searching for a K5,
today there are two at ebay us
http://search.ebay.com/kawai-k5_W0QQfromZR8QQsokeywordredirectZ1QQsosortpro=...
I have not installed a new backlight in my K5m yest. The glowlaunch light in my K2000 continues to work great. Good luck to you. Didobrain ... From:...
ok. Thanx for the infos! I just make my first experiments on k5
resynthesis - i like this tool a lot!
cheers
phono
--- In k5synth@yahoogroups.com, Antoine...
Hello all, I was playing my K5 earlier today (through the headphones) when it made a "crack/pop" sound. The volume level then dropped, and now when I play a...
Have you tried my PSU trick? (Desolder every joints and put new solder) Maybe it will fix your problem, once in the headphones I had an unsupportable hum until...
Well my k5 "got better", perhaps it was a problem with my headphones, I hope. Thanks for all the help on this issue. I will let people know how the 147k...
... I did the mod a few years ago. It made my K5 louder, but it also made the noise louder as well. Plus, if I turn the volume all the way up, I notice some...
Well I replaced my backlight with one I ordered from www.nightlaunch.com. It took less than two weeks from when I ordered and the parts look good. Good...
Glad you like it, wish I had more time to contribute to it myself, but I am really happy that so many people are using it. Joel (Moderator) ... Outgoing mail...
Update: Well today I ordered a new inverter from www.DigiKey.com. I found an inverter that looks like it will do the job - for those interested it is: Digikey...
The higher the voltage and freq the brighter the backlight. ERG power has good inverters/choice, but the problem is to find a place to buy them(My local shop...
You're getting a 100v inverter. As I see, 120v is kind of rare(I've been told these things output 120, not 100). ... -- antdes45@... You're getting a...
Good information. My Nightlaunch backlight is still going strong on my other gear, and I suppose I should get one for my K5. First I will try the re-solder...
It is very easy to find the inverter but it is not next to the backlight. It is a white box about 1.5"X.5"X1" in the right corner of the K5 (as you are...
You wrote: "As I see, 120v is kind of rare(I've been told these things
output 120, not 100)"
The best I can tell the inverter voltage output is related to,...
Nichia box on mi-010 board near the plug on the top cover. Actually the highest voltage found in here is 24v, so caps are not a problem(And the only one with a...
Here is the latest, it is good news. Today I got my parts for DigiKey. As below I replaced my backlight with a blue backlight from nightlaunch. It worked...
The LM386 doesn't produce any noise. Even if you unplug the signal there will still be some. Sctually the problem is a noisy ground. It's sharing the same...
It looks like you have already changed out the op-amps and found that
the noise is still there. Have you tried anythink to fix the noisy
ground? Is it that...
Digital Ground is plugged to one bridge's negative pole and analog to
0v line of the transformer(Black wire). I know it's a noisy ground
because when I...
Hmm...I am going to have to get the schems from Kawai - I will also do some research on how to filter a ground. If the analog ground is noisy the op-amps will...
Good information, I enjoyed reading it. ... From: nelsonj_sce To: k5synth@yahoogroups.com Sent: Sunday, October 03, 2004 8:31 PM Subject: [k5synth] Re: How to...
Antdes, Good information in the note below. It sounds like the good news is that the digital (D) and analog (A) have seperate grounds. From everything I have...
Buzzing in rear out is signal ground noise, all pcbs have sepparate analog grounds to PSU but linked together on the psu. ... Today ... to ... on ... directly ...
I got the schems yesterday and I will take a look at the ground issue. Although all grounds will eventually get to a single point, one idea is to make sure the...
Has anyone converted the Kawai K5 sounds (the 9 cards) to K5 Pro Editor format? This seems to be the only editor I am having luck with transfering sounds...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
