Maybe a lot of you have work with the Overtone program, didn't you? And you remember that function that allowed to take a "snapshot" of an audio file, and then...
The one I found is called FLATLITE. The onyl problem I found is that once it's cut, the sides have to be taped or sealed back again I think. ... -- Antoine...
In the group's files section, there's a Wave Analyzer that can do the job with WAV files, it's not the whole file's snapshot though. If you have SoundForge you...
hello, i don´t own a k5 synth anymore, just a k5000s and k5000r. but sample analysis and resynthesis is similar to k5 and k5k. for the k5k there is sounddiver...
First of all, thanks a lot to Antoine and Lunatik, I'll take your opinions and will investigate more about Overtone, it's also a good idea to use Vertigo (I...
Hi, Yep, the .NET-based wave analyser takes only short samples. It asks for the sample position you want to analyze. It's been a long time I've used Overtone's...
Hi all, Sorry for the delay. I'm home for the next days(this time) so I'll be able to buy the ROMs. Please confirm you still want the ROMs. New requests are...
I have had my K5 stored in the garage for the last 6 years. The last time I used it, it's LCD was getting dim and it aliased a ton and didn't have much output....
... There are some in the files section of the group, but I already heard some K5 MP3s that had much better sounds than the sounds I can find. I have Sound...
I'm not familiar with the Flatlite EL stuff. Can it be cut to size or is it something that is filled with "glowing stuff" that if you cut it, it pours out? ...
... They say it can be cut to size, but it has to be protected against humidity so it has to be sealed again once it's cut. I don't know if it would be...
All I know is that it comes from Kawai UK and we first heard about it in 2004. Kawai US and Kawai of Japan are not aware that ROM v1.3 exists. I can confirm...
If you can use an UV eraser you can just use the 27512 EPROM that's already in there and reprogram it. BTW, there are two ROMs in the synth. The one to change...
Here is a link to a post I made a few years back. I got an inverter from DigiKey per the link. My backlight and inverter still work great and the inverter...
Hi, just a little update. Someone reminded me, I do accept PayPal. Once I'll get the ROMs and be ready to ship, I'll write the instructions to install it. No...
Howdy, I just replaced IC 8,9,10,11. Now I got no display at all. Every time you turn it off a line appears across the display, but in a different place each...
The good chips went at the right places? In the right orientation? Did you cut any traces? Is there a cold solder joint? (Look if solder is there on both sides...
Thanks for confirming! You wanted one before you got it. I wonder if you should send the synth to anyone of us that knows something about electronics. We could...
howdy, it's possible I overheated some chips. i think i mangled a couple holes on IC 11. I'm going to foder the cips, and sockets. Install the sockets and try...
Hi, this one also ended up as spam... ... Sometimes you just need to reheat and add more solder ... Have you got an answer from Kawai? If not, I guess it will...
Howdy, That's a good idea as I know nothing about electronics except building countless kits, automating mill machines and repairing/modifying (all but 1 of my...
Well, you certainly know stuff, but you don't have an other K5 to compare with yours. I hope you didn't damage any traces... lots of via holes are hidden under...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
