Hi,
opening the case is really simple ( 4 philips-screws on the front panel, 2 left
2 right
and 3 screws in one row on the bottom of the case - back side ).
Then the whole front panel can be liftedbackwards.
You can see know all the PCB´s. Locate the PCB where the cracklin knob
is , pull up ALL grey-black knobs of the front panel and unscrew all six-sided
screws,
which hold the PCB to the font panel.
Then unscrew the PCB ( mostly 4 screws )
Than it´s easy aganin.
Unsolder the defect Poti ( the Ohm value is printed on the Trimmie) and replace
it
( soldering )with a knew one ( should be available in every electronic parts
store ).
Tschuss Gunti
-------------------------------------------------
WebMail from Tele2
http://www.tele2.at
-------------------------------------------------