Hey MP4-users. Suddenly the "Effects on/off", on my MP4, has stopped working. The LED doesn't light and the effects are not being activated. Its pretty...
Mine still lights, but is difficult to turn on and off- takes several tries. I sprayed contact cleaner on the switch, but it still acts up. It's the only...
the trick it to get the switch cleaner and or alcohol in to the switch its self and not just spray over it. To do this you will need to open up the monpoly...
Hi As the others I assume the switch is faulty. You may test it by shorting the switch-contacts. You can do this either direct at the switch pcb, or by...
Just got a mono/poly and am I amazed by the organic and liquid sounds I get out of it. This synth is way more interesting to me than a Minimoog or Jupiter or...
650 isn't unreasnable but it is at the high end of most monopoly prices. I picked mine up for around £400 which is 507.54 Euros. Is worth every penny and...
It looks like the main output on my monopoly just died. I get an extremely quiet signal out of it now but the headphone out works fine. I looked at the...
Does anyone have any experience using the Paia Midi CV converter with the mono/poly? I am wanting to get one, but am curious to know how it works with the ...
I use the paia midi2cv8 converter with my monopoly. I use the gate outs to trigger the arpegiator but I had to make a special cable to convert gate to...
I have one to use with my mono/poly. It works well. The arp clock in is s-trig so your cable might have to be s-trig, although I think that there are s-trig...
When I sequence the monopoly from an external sequencer via the CV+trig in the sequence is totally in consistent. I get dropped/skipped notes frequently and...
Hi Danjel. What is exactly the source of the gate-signal? The monopoly expects (and sends) +15 Volts as gate. And the real threshold is set by R63/R62 at ...
Hey Florian, Thanks for the info! (as usual :) ) So just to clarify, the trig input of the monopoly is a normal gate signal but the arp trig is an s-trig? I...
Hi Danjiel ... I use a HARMS Mac16 (very rare interface built in the late nineties by a german engineer in Hamburg, comparable to the kenton pro 2000 or...
I would like to redact my previous statement about the midi2cv8. I have been having problems with the gate level being suitable for reliably triggering notes...
Hi Guys, I went through the tuning section of the callbration procedure for the monopoly but ran into some issues. Everything went as expected (e.g. read and...
So to update: I can now see the holes in the pcb where I can reach the VR101, VR201 etc. (The lighting in my room is not so great). However I still totally...
So I finally figured out the stretch tuning system. I have to say that the manual was terrible in explaining what needed to be done and it was only from...
My monopoly is all tuned up now if I play it by keyboard or external CV. However, when I use the VCOFM in trick so I can trigger chords it seems like it screws...
Hi there Danjel! I had the same problem as you with the tuning of OSC 3. But while trying to tune it i burnt the whole PSU. I wonder, when i have repaired it: ...
I just noticed that the top 3/4 keys on my monopoly have stopped working properly. Sometimes there is a latency when i press them and sometimes a note doesn't...
Hi everybody: I need some info about the psu of the mono/poly. Sadly thhe old one has died I need to know how many volts arrive to the board from the power...
Hello The transformer delivers 2 x 22,0 Volts AC After measuring at the two big capacitors I find 25.0 Volts DC at the large cap, and 26.6 Volts DC at the...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
