It looks like the main output on my monopoly just died. I get an extremely quiet signal out of it now but the headphone out works fine. I looked at the...
Does anyone have any experience using the Paia Midi CV converter with the mono/poly? I am wanting to get one, but am curious to know how it works with the ...
I use the paia midi2cv8 converter with my monopoly. I use the gate outs to trigger the arpegiator but I had to make a special cable to convert gate to...
I have one to use with my mono/poly. It works well. The arp clock in is s-trig so your cable might have to be s-trig, although I think that there are s-trig...
When I sequence the monopoly from an external sequencer via the CV+trig in the sequence is totally in consistent. I get dropped/skipped notes frequently and...
Hi Danjel. What is exactly the source of the gate-signal? The monopoly expects (and sends) +15 Volts as gate. And the real threshold is set by R63/R62 at ...
Hey Florian, Thanks for the info! (as usual :) ) So just to clarify, the trig input of the monopoly is a normal gate signal but the arp trig is an s-trig? I...
Hi Danjiel ... I use a HARMS Mac16 (very rare interface built in the late nineties by a german engineer in Hamburg, comparable to the kenton pro 2000 or...
I would like to redact my previous statement about the midi2cv8. I have been having problems with the gate level being suitable for reliably triggering notes...
Hi Guys, I went through the tuning section of the callbration procedure for the monopoly but ran into some issues. Everything went as expected (e.g. read and...
So to update: I can now see the holes in the pcb where I can reach the VR101, VR201 etc. (The lighting in my room is not so great). However I still totally...
So I finally figured out the stretch tuning system. I have to say that the manual was terrible in explaining what needed to be done and it was only from...
My monopoly is all tuned up now if I play it by keyboard or external CV. However, when I use the VCOFM in trick so I can trigger chords it seems like it screws...
Hi there Danjel! I had the same problem as you with the tuning of OSC 3. But while trying to tune it i burnt the whole PSU. I wonder, when i have repaired it: ...
I just noticed that the top 3/4 keys on my monopoly have stopped working properly. Sometimes there is a latency when i press them and sometimes a note doesn't...
Hi everybody: I need some info about the psu of the mono/poly. Sadly thhe old one has died I need to know how many volts arrive to the board from the power...
Hello The transformer delivers 2 x 22,0 Volts AC After measuring at the two big capacitors I find 25.0 Volts DC at the large cap, and 26.6 Volts DC at the...
The Mono/Poly can send and respond to trigger signals and voltage signals for the specification of pitch. As long as the voltages between both units are...
Hi, the TR606 has 2 trigger out minijacks. One associated with the Low Tom and the other to the High Tom. I tried connecting but I must have done something...
More info: The TR-606 Rhythm Composer provides two independant, programmable TRIGGER OUTs to allow interfacing with synthesizers or sequencers. Each trigger is...
Hi Louis ... Trigger-out606 to Arpeggiatorclock-in-MP will cause a late triggering of the Arpeggiator. The Arpeggiator is a switched trigger in. You need some ...
Hi All Long time MP4 lover here.. turned it on today after a couple of months storage and it's virtually silent, till I crank the headphones loud and then.......
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
