Hi everybody.  I'm running an ES-1 and EA-1 along with a couple of other groove
boxes and drum machines in a live setup.  I'm probably not alone when I say that
I'm really tired of all the wall wart power transformers I need to use.  I'm
thinking about trying one of the power supply units designed for guitar pedal
setups.  They have multiple 9V and 18V outputs and take up a lot less space on a
power strip.  I'm just worried that there may not be enough amperage (500ma) on
each of the outputs to drive these Electribes and grooveboxes.  Does anyone have
any experience with using these pedal board supplies?
   The Voodoo Lab Pedal Power 2+ looks to be very well made and would clean up my
live setup considerably.  What do you think?  Thanks, Eric. aka e:machinery.

Has anyone successfully dumped MIDI files to Electribe EA1 using MIDI
OX?

I have dumped MIDI info into MIDI OX (I think?) but I can't load
MIDI files back into my EA1. Every time I try to load the EA1 I get a
pop up.

I would love to back up patches so I can start making new ones but I
would like to be able to dump them back. Any help would be
appreciated.

Hi,
   The M Audio Trigger Finger is a MIDI controller which has 16 drum
machine style pads, 4 sliders and 8 knobs.  I figured out how to
assign notes to the pads to trigger notes in Ableton and hardware
such as the Korg EA1 but I would like to figure out how to assign
the sliders and knobs to correspond to the Korg EA1 knobs (ie. cut
off, EG, delay, etc.)  In addition to doing internet searches to
figure out a solution to my problem I have read all the instructions
that came with the Trigger Finger and the little instructions that
came with the EA1.  But maybe there is a possiblity that Ableton
Live 7 can't store any MIDI info other than the notes in it's
external instrument slot because there is no macro to control
parameters.  I am going to expirement and try to just run the EA1
into Abelton as a controller and see what MIDI Ableton records.  My
goal was to be able to control my EA1 through the Ableton sequencing
software.

thanks,

--- In korgelectribes@yahoogroups.com, yanledean <yanledean@...>
wrote:
>
> hello
> don't know the trigger finger
> but can you explain more your problems..?
> you want assign pad to ea-1 ,  knobs..? ,  the 2..?
> do you succeed to one of them..?
> are you on the good midi canal..?
> is trigger finger can send NRPN message..?
>
> nay-seven
>
> Mark A. a écrit :
> >
> > Has anyone figured out how to program the Trigger Finger to
trigger an
> > EA1? I wrote down all the NRPNs of the EA1 and I have a list of
the
> > EA1 controller messages and values but I don't know how to
program it
> > all so the Trigger Finger will trigger the EA1. I have done web
> > searches trying to figure this all out without any luck.
> > Any help would be appreciated.
> > -Mark
> >
> >
>

hello
don't know the trigger finger
but can you explain more your problems..?
you want assign pad to ea-1 ,  knobs..? ,  the 2..?
do you succeed to one of them..?
are you on the good midi canal..?
is trigger finger can send NRPN message..?

nay-seven

Mark A. a écrit :
>
> Has anyone figured out how to program the Trigger Finger to trigger an
> EA1? I wrote down all the NRPNs of the EA1 and I have a list of the
> EA1 controller messages and values but I don't know how to program it
> all so the Trigger Finger will trigger the EA1. I have done web
> searches trying to figure this all out without any luck.
> Any help would be appreciated.
> -Mark
>
>

Has anyone figured out how to program the Trigger Finger to trigger an
EA1?  I wrote down all the NRPNs of the EA1 and I have a list of the
EA1 controller messages and values but I don't know how to program it
all so the Trigger Finger will trigger the EA1.  I have done web
searches trying to figure this all out without any luck.
Any help would be appreciated.
-Mark

Hi
get a cheap Behringer FCB1010 Midi foot pedal, there are 100 presets, 10
buttons and 2 expression pedals.
It's entirely programmable by the pedal itself or its pc editor.
Have fun

Anyone know why this is going on?  Had written each one too.  Never
fails, as soon as powered down and back up every pattern set gets
reverted to factory settings.  Are all my written patterns gonna be
the next to go?  Help!

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

Cool!  Thanks so much.  I'll save this message and take it to a repair
tech here in Town if I find one.  I unfortunately don't solder as I'm
legally blind, and tried once, burning my nose in the process lol!

On Jun 4, 2008, at 9:45 PM, gmeredith1 wrote:

> You can make a pedal really easily and hook it up to the electribe,
> if you are handy with a soldering iron. You will need to open up your
> electribe though. Just take the back off it, unscrew the main circuit
> board and remove it (you'll have to take the knobs off to do it).
> You will then see the circuit board that has all the switches,
> buttons and knobs soldered to it.
>
> Just locate where the play/stop/record buttons solder to the board,
> and solder wires to these points. Mount a small mini-DIN 5-pin socket
> (the ones in the back of a computer for the mouse or keyboard) in the
> back of the electribe, and solder the wires to the socket terminals.
> Put your machine back together.
>
> Now all you do is get a flat plastic, metal or wooden box, and mount
> 3 "momentary" pushbutton switches in it, a reasonable distance apart
> from each other, so you can get to them with your foot. Solder the
> wires of a 2 metre 5-wire multicore cable to the switch terminals. On
> the other end of the cable, solder the wires to a mini-DIN plug (the
> same ones on the end of a mouse or keyboard cable) into their
> corresponding places to connect to the right buttons on the
> electribe.
>
> That's it. It's a lot easier than it sounds. If you have a sampling
> ES electribe you can use the footswitch record button to sample while
> on the fly without using your hands - cool in live gigs!
>
> Cheers, Graham
>
>
> --- In korgelectribes@yahoogroups.com, Pete Nalda <lpnalda@...> wrote:
>>
>> Sure wished electribes had a stop/start pedal option, so any
>> alternative?  TIA.
>>
>> Egun On, Lagunak! (Basque for G'day, Mates)
>> Pete Nalda
>> http://www.myspace.com/musikonalda
>>
>
>

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

Sure wished electribes had a stop/start pedal option, so any
alternative?  TIA.

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

I have tried both methods. i use the song mode more when i want to have my hands
free to do other things. manual more when I'm concentrating on playing the
electribe.



Pete Nalda <lpnalda@...> wrote:
  On May 1, 2008, at 12:27 PM, James Squeaky wrote:

  > if there is, i haven't been able to figure it out either. i just
  > scroll through each time. but if you hold the shift key, it'll
  > scroll 10 patterns ahead so that's a bit faster.
  >

  Thanks.  That's a help anyway.  On a related note, because of this, I
  wonder how many people just forgo song mode and switch patterns
  manually?

  >

  Egun On, Lagunak! (Basque for G'day, Mates)
  Pete Nalda
  http://www.myspace.com/musikonalda






                         James Squeaky

   Argumentix
   http://www.belowpdx.com/argumentix

Below PDX Records
http://www.belowpdx.com/
















---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]

Has anyone noticed the buttons browning with age.  Is there a good way
to clean them to make them white again?  I did have my unit in storage
for awhile and when I got it out, noted the buttons had gotten
darker.  Anyone else?

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

On May 1, 2008, at 11:40 AM, adrian gibbs wrote:

> i couldn't that promblem out, either.

Ok thanks

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

On May 1, 2008, at 12:27 PM, James Squeaky wrote:

> if there is, i haven't been able to figure it out either. i just
> scroll through each time. but if you hold the shift key, it'll
> scroll 10 patterns ahead so that's a bit faster.
>

Thanks.  That's a help anyway.  On a related note, because of this, I
wonder how many people just forgo song mode and switch patterns
manually?

>

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

if there is, i haven't been able to figure it out either. i just scroll through
each time. but if you hold the shift key, it'll scroll 10 patterns ahead so
that's a bit faster.


Pete Nalda <lpnalda@...> wrote:                             Ok, I've read
the manual on song creation.  And do understand the
  workflow of 1. Select position and 2. Select Pattern but here's
  something I *couldn't* find in the manual.  Is there any quick way of
  inserting the same pattern in say 8 positions?  say you want c49 on
  001-007.  It's just time consuming I think to have to scroll through
  all the patterns each time.

  TIA.

  Egun On, Lagunak! (Basque for G'day, Mates)
  Pete Nalda
  http://www.myspace.com/musikonalda






                         James Squeaky

   Argumentix
   http://www.belowpdx.com/argumentix

Below PDX Records
http://www.belowpdx.com/
















---------------------------------
Be a better friend, newshound, and know-it-all with Yahoo! Mobile.  Try it now.

[Non-text portions of this message have been removed]

Ok, I've read the manual on song creation.  And do understand the
workflow of 1. Select position and 2. Select Pattern but here's
something I *couldn't* find in the manual.  Is there any quick way of
inserting the same pattern in say 8 positions?  say you want c49 on
001-007.  It's just time consuming I think to have to scroll through
all the patterns each time.

TIA.

Egun On, Lagunak! (Basque for G'day, Mates)
Pete Nalda
http://www.myspace.com/musikonalda

PEACE,

A FEW TOPIC FOR DISCUSSION AND A NEW YOUTUBE.COM VIDEO.

1. GANGSTER RAP
2. HILARY OR  OBAMA
3. WENDY'S FROSTY FLOAT

1. GANGSTER RAP

ALICIA KEYS HAS COME UNDER FIRE, BY THE MEDIA , FOR COMMENTS ON
AMERICA'S HAND IN GANGSTER RAP.  SHE HAS IMPLIED THAT GANGSTER RAP
AND TUPAC'S DEATH ARE GOVERNMENT CONSPIRACIES.  I AGREE 100%.

  THE CRIMINALIZED IMAGE OF BLACK YOUTH HAS BEEN A EFFECTIVE TOOL IN
BRAINWASHING ALL OF US.  WHITE PEOPLE GO AND SPEND MONEY ON GUNS,
SECURITY SYSTEMS, ETC. BECAUSE THEY ARE AFRAID OF BLACK YOUTH.

BLACKS ARE SO BRAINWASHED THEY FEEL IT IS BADGE OF HONOR TO BE
CONSIDERED A CRIMINAL.  MIDDLE-CLASS BLACK YOUTH ARE EMBRASSED  OF
NOT BEING POOR.  THEY FEEL BEING WELL-TO-DO IS BEING A SELL-OUT TO
THEIR RACE.  THEY SELL DRUGS NOT BECAUSE THEY NEED MONEY, BUT TO
HAVE "STREET CREDITIALS".

I CAN GO DEEPER IN THOUGHT, BUT IT WOULD TURN INTO A THESIS.  THE
PRINCIPLE REASON FOR THIS CRIMINALIZED BLACK IMAGE IS MONEY!  MASS
HYSTERIA KEEPS THE ECONOMY CIRCULATING.

http://www.youtube.com/watch?v=iH_JxSmWP-M

HERE IS MY YOUTUBE VIDEO I DEDICATED TO GANGSTER RAP!

2. HILARY OR OBAMA
   THE CAMPAIGNS FOR HILARY CLINTON AND BARAK  OBAMA  ARE GETTING
REALLY DIRTY.  WE MUST  NOT FORGET THEY ARE BOTH DEMOCRATS.  AT THE
END OF THE BATTLE WE WILL HAVE A WINNER. I WILL GLADLY VOTE FOR
EITHER ONE.  A BLACK MALE PRESINDENT OR A WHITE FEMALE
PRESIDENT,WITH  EITHER ONE AMERICA WILL BE BETTER  OFF!

3. WENDY'S FROSTY FLOAT

I LOVE THOSE FROSTY FLOATS. I LIKE VANILLA ICE-CREAM WITH ORANGE
SODA.  RIGHT NOW IT IS MY MOTIVATION FOR LIFE.  I STOP AT WENDY'S
ATLEAST 4 TIMES AWEEKS.  THE WORKERS KNOW MY BY NAME… ANY ONE SHARE
MY PASSION?

PEACE,
PDB

DOWNLOAD HERE:
http://www.sonicgarden.com/artists/1848


1848

	 Every once-in-awhile, Hip-hop goes through a period where the
music starts to get stale.  Then , all of a sudden {BAMM!}, new artist
come along to inject life back into the game. Such is the case with the
spry  Wisconsin group , 1848.  Their delectable debut, FORWARD, is not
only full of bright promise, but breaks the monotony of the some ol'
sounds were hearing today.

1848 members:
TRACK LACER, PHAT DADDY BU, MC AK, HURRIKANE, TEDJU, SLANGSTON HUGHES,
& DOUBLE C

LINK:
http://www.youtube.com/watch?v=ygu7hVqgQDY

DEZ G

THERE'S  NO QUESTION, DEZ G IS ONE OF MILWAUKEE'S POWERFUL PRODUCERS.
HIS PRODUTION SKILLS HAVE MOLDED AND SHAPED A MAJORITY OF BREW CITY'S
FINEST STREET POETS.  IT'S BEEN ALMOST 20 YEAR SINCE DEZ G'S GENESIS
AND HE'S STILL BLUE FLAMIN'  BEAT-MACHINES AND FRUITY-LOOPS.

THROUGH THE MEDIUM OF SPARK ONE  INCORPORATED, DEZ G.  HAS RELEASED
THOUSANDS OF HIP HOP SONGS DIRECTLY TO STREETS OF MILWAUKEE.  TRACK
LACER AND PHAT DADDY BU WERE PART OF SPARK ONE INCORPORATED HUMBLE
BEGINNINGS.  WE APPEARED   ON "SPARK ONE RIDERS" AND " VERSIONS OF A
GETTO RIDER",  BEFORE BRANCHING OFF TO FORM SMOOTH SALING RECORDS.   WE
BOTH RYHMED ON "FUNKY SH!#". THIS POSSE CUT OFFERED POTENT GANGSTER-
TALK COMPLIMENTED  BY BAR-BRAWLING RAPS.

"DO ME" IS THE NAME OF DEZ G'S LATEST JOINT.  IT IS AVAILBLE AT
http://www.sparkoneinc.com

PEACE,  PHAT DADDY BU

The ER-1 is my favorite drum machine of the many that I own.  It was
used to produced some of the songs our lastet c.d.:
GHETTOCENTRIC II.

HERE IS OUR VIDEO:
http://www.youtube.com/watch?v=WixT040uYzg

THEN GO TO WWW.CDBABY.COM/TRACKANDBU AND SUPPORT A FELLOW ARTIST!

--- In korgelectribes@yahoogroups.com, "slimanshamen" <slimanshamen@...> wrote:
>
> Hi ... Can anyone recommend the best way to set up a battery pack for
> the electribes. What battery etc. I really need to sit on a mountain to
> get some inspiration.. Thanks
>

I will be doing the same thing eventually.  I did pick up 2 good used computer
back-up
batteries from the city dump, the size of a motorcycle batt., 12v of course.

I will need to reduce the voltage, not sure how.

I see where others are using remote control battery packs from a good hobby
shop, 9v.

I think this was a demo from Guitar Cntr ups'd to me.....

I have no rythms in patterns c.23-d.64, all the rest are fine.  The LCD shows
"init" about the
pattern #.  Does it sound like they were erased?

I assume I need backup media to rebuild which won't happen.  Otherwise I am
faced with a
return but they have no stock locally.

Is my thinking on the right path here?


I followed the quick start tut and recorded a sample from a mic just fine.  I
can't write until
my media gets here.

Hi ... Can anyone recommend the best way to set up a battery pack for
the electribes. What battery etc. I really need to sit on a mountain to
get some inspiration.. Thanks

Do A Yahoo Search For 'phat Daddy Bu'.  I Have Songs All Over The Net.

  [waywells@...] wrote:
Anyone got any Electribe tunes posted up on the net.
I have a couple up on soundclick
www.soundclick.com/tgz2
www.myspace.com/tgz2

C'mon lets hear what you've been up to.
Jon

Anyone got any Electribe tunes posted up on the net.
I have a couple up on soundclick
www.soundclick.com/tgz2
www.myspace.com/tgz2

C'mon lets hear what you've been up to.
Jon

One will be "master", the other "slave"

Cable goes from "master" MIDI Out  <---->  "slave" MIDI In

Slave will need to be set to receive clock from MIDI

Then just press PLAY on the Master and the Slave will follow along  :)

Andrew

>>> "slimanshamen" <slimanshamen@...> 12/08/06 12:01 PM >>>

Yeh I guessed that I would need a midi cable.
Ok I not experienced.
which one for in and out and I was needing to know which one would be
the master. ie if i was playing one... ea for example if I pressed
start on the er would it join in ...in synch. if you know what I mean.
does ot auto start when the pattern starts on the ea.

--- In korgelectribes@yahoogroups.com, ben bowler <benjbowler@...>
wrote:
>
> erm midi cable
>
>
>
>
> --- slimanshamen <slimanshamen@...> wrote:
>
> > Hi.
> > Please can someone tell me how to link the er1 mk11
> > and ea1 mk11
> > together so that they will be in synch,
> > I am a novice,
> > and need many years of training from my
> > boddhisattvas.
> >
> >
>
>
> www.myspace.com/videoheadmusic
>
> Send instant messages to your online friends
http://uk.messenger.yahoo.com
>

Yeh I guessed that I would need a midi cable.
Ok I not experienced.
which one for in and out and I was needing to know which one would be
the master. ie if i was playing one... ea for example if I pressed
start on the er would it join in ...in synch. if you know what I mean.
does ot auto start when the pattern starts on the ea.

--- In korgelectribes@yahoogroups.com, ben bowler <benjbowler@...>
wrote:
>
> erm midi cable
>
>
>
>
> --- slimanshamen <slimanshamen@...> wrote:
>
> > Hi.
> > Please can someone tell me how to link the er1 mk11
> > and ea1 mk11
> > together so that they will be in synch,
> > I am a novice,
> > and need many years of training from my
> > boddhisattvas.
> >
> >
>
>
> www.myspace.com/videoheadmusic
>
> Send instant messages to your online friends
http://uk.messenger.yahoo.com
>

erm midi cable




--- slimanshamen <slimanshamen@...> wrote:

> Hi.
> Please can someone tell me how to link the er1 mk11
> and ea1 mk11
> together so that they will be in synch,
> I am a novice,
> and need many years of training from my
> boddhisattvas.
>
>


www.myspace.com/videoheadmusic

Send instant messages to your online friends http://uk.messenger.yahoo.com

Hi.
Please can someone tell me how to link the er1 mk11 and ea1 mk11
together so that they will be in synch,
I am a novice,
and need many years of training from my boddhisattvas.

Ebay item number 230061038064.

http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=230061038064

Bidding starts at $299