Thanks for the fast responses. I switched the diode, did not resolve. I
switched the midi
cables, did not resolve either. Right now I'm testing with my meter to find out
where the
signal stops. SO CLOSE! I will take some pix tonight and post them. Hopefully
they will be
victory pix.
I just built my first LSDJ-MC2 and am having a little trouble with it. Any suggestions are much appreciated. Right now I can power on the unit, pass POST, and...
It might not be it, but have you connected the diode near the optocoupler in the right direction? /nitro2k01 ... YAHOO! GROUPS LINKS ... -- The blog of...
Firestarter should be able to answer all questions conserning this project, because he is awesome! and he helped me out so much when i was building mine, but...
Thanks for the fast responses. I switched the diode, did not resolve. I switched the midi cables, did not resolve either. Right now I'm testing with my...
How frustrating. Every part of the midi circuit checks out. I have continuity in all the right places. I replaced the 6N138 and I tried a different midi...
Check again, turn the diode around again, try to swap the 2 midi-lines and finally, replace the 6n138. Also check if the line from the 6n138 is connected on ...
Sorry, Yahoo's rich-text editor beta is truely a beta. Anyway, my real post: The components are all now back to the way they are on the schematics. I am...
The diode near the opto-coupler is turned correctly, so that's not the problem. Have you tried putting the 6N138 the other way? Weird enough, it seems that...
The mark on the 6N138 is there, just hard to see in that picture. I turned it around just to doublecheck, but it did not resolve it so I put it back. Thanks...
It looks like your chrystall might be too far away from your PIC. I had the same problem come to think of it, and i remember it was murder getting it all back...
Ok, so I tried replacing the resistors, no difference. I tried moving the crystal closer, and replacing it, no difference. I tested every point through out...
... Just thought i would say that, i should have mentioned this before sorry- but you will need to move the 22pf capacitors along with the crystal so they are...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
Offline 
Send Email