Hello!

I have the same problems. Has anybody fix this problem.
I think its a wrong pic config word.
Has anybody the right config word in hex for the pic???




--- In lsdjmc2@yahoogroups.com, "Louk" <scifunk@...> wrote:
>
> hello beowulfe,
> thanks for your reaction.
>
>
> > first was that the midi lines were crossed.
>
> i read that somewhere else and tried to swith it, no results
> both give the same reaction, if i press the 'mode' button, it starts,
> after 1/4 beat it stops. now i discovered its doing this also, without
> a midi cable connected
>
>
> move the crystal closer to
> > the processor in order to get the clock working properly,
>
> I think my Chrystal is really close to the procesor
>
> The
> > last thing that could be an issue is to make sure the midi interface
> > you test with puts out a true beat clock.
>
> I've tested it with a pc as master with fl-studio,( my mc-303 and
> dr-202 are also connected and for them midi works) and with the mc-303
> or dr-202 as master, no different results.
>
>
> so, it might be a problem in the midi circuit of the mc2?
>