Only HS is working. All other options won't work at all or with a wrong
speed, so it looks like it works but without midi-In.

I will check the needed configword later the day and will post it.

Thomas

On 3/31/09 12:23 PM, markus770807 wrote:
>
> My Problem was that in my programmingsoftware its not possible to
> aktivate single options like HS or XT or LowVoltage.
> I only can choose to set the bits 0-13 or write it in a whole hex
> word. So i have to write all possible options.
>
> But i think i dont have a problem with the pic and i start a new topic.
>
> I think we can close this thread!!!
>
> Hope that i can finish my mc2
>
> --- In lsdjmc2@yahoogroups.com <mailto:lsdjmc2%40yahoogroups.com>,
> firestARTer <firestarter@...> wrote:
> >
> > The config word is included in the hex.
> > Never activate copy protection, as then you can't successfully
> reprogram
> > the pic again, as far as i remember.
> > Set it to HS oscillator and don't program in LVP mode, then it
> should be
> > fine for the soft.
> >
> >
> > On 3/29/09 3:50 PM, markus770807 wrote:
> > >
> > > Hello, i am new in the list and i have a few questions.
> > >
> > > I have a vm111 pic programmer and this one allows only to set the
> > > config of the pic with a configword in hex. I looked in the datasheed
> > > and found some infos.
> > >
> > > I try different configwords but nothing works.
> > >
> > > Has anybody the config word in hex for the pic?
> > >
> > > Please please help!!!
> > >
> > >
> >
>
>