You Nak, this means that you didn't set your electribe correctly. It sends sync data but no start or stop i think. I know it works fine with the electribe,...
im new to making chiptunes> and really need a hand setting this up guys. ideally i want my esx1 electribe to be the master, and control lsdj thru my midi>gb...
Well, you should really spend some time with LSDJ first, before you try to use midi. Make some good instruments, write some nice patterns. Then, there are 2...
... I would advise just to go out and get the parts not all at the same time. You could just get, let's say, one or two parts whenever you have time? That way...
Lowgain from lowgain audio sells them complete I think.. his are nice too From: lsdjmc2@yahoogroups.com [mailto:lsdjmc2@yahoogroups.com] On Behalf Of Styles ...
Have assembled the circuit on a breadboard but can't get LSDJ sync going. The MIDI in/PIC/button stuff all seems fine, with the various midi messages making...
I guess it's not about arduinoboy. Check if you connected the cable well and if the connections really reach the gameboy. Link Cables have 2 wires crossed. ...
... I think he meant that he tried to probe for shorts with his multimeter. And the result is pretty logic: When power is off, the HC14's outputs are in hi-Z...
Yes, that's what I meant, was just aimlessly probing around with the multimeter :-) Pleased to report that it's now working fine, it seems I have a complete...
-I guess the moral of the story is don't try to sync to 350BPM :-) what can i say? Read the manual ;) nice to hear that it works. have fun with it. greetings ...
HI1 I would like to send messages to everyone in this group! __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes,...
well, i soldered a mc2 a few weeks ago and when i tested it everything worked fine, exept for the full-midi mode. sometimes changeing the instrument works but...
... My guess is that something is wrong with the MIDI cable. Are you using the right opto-coupler? Is your cable abnormally long? The MIDi sync message is the...
Hello, i am new in the list and i have a few questions. I have a vm111 pic programmer and this one allows only to set the config of the pic with a configword...
Hello! I have the same problems. Has anybody fix this problem. I think its a wrong pic config word. Has anybody the right config word in hex for the pic???...
The config word is included in the hex. Never activate copy protection, as then you can't successfully reprogram the pic again, as far as i remember. Set it to...
Thx for answer! When i programm the pic and then read out the statusword the intern oscilator is activatet. Whenn i try to set the config to XT (extern...
Hello to all! I had build a mc2 and i had burned the pic. My Programmer needs a configword and i use h3F22 because this is the only configword that works. I...
My Problem was that in my programmingsoftware its not possible to aktivate single options like HS or XT or LowVoltage. I only can choose to set the bits 0-13...
Only HS is working. All other options won't work at all or with a wrong speed, so it looks like it works but without midi-In. I will check the needed...
I checked for it and you got to use the configuration work 3F22. That means: Oscillator HS Watchdogtimer Off Power Up timer Enabled Master Clear enabled Brown...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
