Have assembled the circuit on a breadboard but can't get LSDJ sync going. The MIDI in/PIC/button stuff all seems fine, with the various midi messages making...
I guess it's not about arduinoboy. Check if you connected the cable well and if the connections really reach the gameboy. Link Cables have 2 wires crossed. ...
... I think he meant that he tried to probe for shorts with his multimeter. And the result is pretty logic: When power is off, the HC14's outputs are in hi-Z...
Yes, that's what I meant, was just aimlessly probing around with the multimeter :-) Pleased to report that it's now working fine, it seems I have a complete...
-I guess the moral of the story is don't try to sync to 350BPM :-) what can i say? Read the manual ;) nice to hear that it works. have fun with it. greetings ...
HI1 I would like to send messages to everyone in this group! __________________________________________________ Correo Yahoo! Espacio para todos tus mensajes,...
well, i soldered a mc2 a few weeks ago and when i tested it everything worked fine, exept for the full-midi mode. sometimes changeing the instrument works but...
... My guess is that something is wrong with the MIDI cable. Are you using the right opto-coupler? Is your cable abnormally long? The MIDi sync message is the...
Hello, i am new in the list and i have a few questions. I have a vm111 pic programmer and this one allows only to set the config of the pic with a configword...
Hello! I have the same problems. Has anybody fix this problem. I think its a wrong pic config word. Has anybody the right config word in hex for the pic???...
The config word is included in the hex. Never activate copy protection, as then you can't successfully reprogram the pic again, as far as i remember. Set it to...
Thx for answer! When i programm the pic and then read out the statusword the intern oscilator is activatet. Whenn i try to set the config to XT (extern...
Hello to all! I had build a mc2 and i had burned the pic. My Programmer needs a configword and i use h3F22 because this is the only configword that works. I...
My Problem was that in my programmingsoftware its not possible to aktivate single options like HS or XT or LowVoltage. I only can choose to set the bits 0-13...
Only HS is working. All other options won't work at all or with a wrong speed, so it looks like it works but without midi-In. I will check the needed...
I checked for it and you got to use the configuration work 3F22. That means: Oscillator HS Watchdogtimer Off Power Up timer Enabled Master Clear enabled Brown...
OK THX very much! I will try it tomorow. Do you know if its possible to use a 9V Battery? And do you know what problem else can it be if the Startsequence and...
Ok. I burned the Pic with Configword h3F22. I think now its ok. But now i have all Problems from the beginning again. OK, now i maybe know that i dont have a...
Hi all! First I'd like to thank Firestarter for his work i think he's reading posts so thanks a lot. And in advance I'm sorry for all the questions I'm gonna...
What does it mean : switching Diode for D1 1N4148? A switching diode has a faster switching time from off to on. What's should i use for the button 1 and 2? A...
The parts are very common as mentioned before. At the shop ask for: Diode: 1n4148 Simple pushbuttons for all 4 buttons (closing contacts). IC: 74HC14......
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
