Long time since my previous post, but I do read the digests now and then...= This just droppend into my mailbox (no, it's not April's Fool):
Complete solution...
I have an Axon AX-100 SB (i.e. with the XG sound card). While I typically use it for its obvious intended usage (as a guitar->MIDI converter), occasionally I...
Hello Zeek : 1st off , thanks for the advise given in the past , you have been a well of knowledge to draw from and helped me when I was in the dark on a few...
Tim is correct; press the Global button then hit the Parameter+ button to scroll over to Local Control and set that parameter to "Off" with the value buttons....
On 4/2/04 7:43 AM, "midiguitar@yahoogroups.com" <midiguitar@yahoogroups.com> ... Thanks Hurricane, I appreciate that, and there's a longer response in the GR...
Wonder if anyone had experience with gk2 or any other 13 pin out pickup on my Taylor 514CE. it already has a small mark on face of the guitar so at this point...
Dave Hillebrandt
dhillebrandt@...
Apr 4, 2004 5:28 pm
15444
With regards to the press release, I spoke to the Terratec people at the Frankfurt fair. Though the deal has been signed only about a week ago, they came up...
Dave: I had a RMC Polydrive installed on my Taylor 514CE. It wasn't cheap, pickup/preamp/installation was about $500, but was worth it. A local repairman ...
jboyles
jboyles@...
Apr 4, 2004 5:40 pm
15446
Hi joh, thanks for quick info. Well have certainly heard good things about RNC and know of guitar guys here locally who could install. i assume that means the...
Dave Hillebrandt
dhillebrandt@...
Apr 4, 2004 5:55 pm
15447
Hi John: Which preamp did you get, where is it mounted, and how did you put the 13 pin on??? Joel C. ... [Non-text portions of this message have been removed]...
Hi Joel: I believe it was the Polydrive 4 (?), which was mounted internally. I have a Godin with this setup, and showed it to the repairman, who then cut into...
jboyles
jboyles@...
Apr 5, 2004 12:33 am
15449
John, With your install of the RNC, do you not use any electronics that came with the Taylor or does the RnC pickup do the 13 pin and acoustic sound. All i...
Dave Hillebrandt
dhillebrandt@...
Apr 5, 2004 2:58 am
15450
Hi John: So you put it on the side rather than the top, as on the Godin? The polydrive is the 5 slider job on the multiacs, right? Thanks for the tip! Joel C....
Joel: Correct, it's on the side where the preamps are usually found on most acoustics. It is the 5 slider RMC preamp. It doesn't seem to intefer with the ...
jboyles
jboyles@...
Apr 5, 2004 11:07 am
15453
I had the opportunity to play with GR-20 on the Frankfurt Music Fair. Don´t know if it was poorly set up, but it was noticeable slower than Limex. A...
How about the ten best guitar synthesizer features that were lost to time. Here are some of my examples, in no order. "Ultrasonic" fret tracking as in the...
Dave: I use only the RMC for 13 pin and acoustic outputs. I bought the Taylor w/no electronics, knowing I was going to have the installation done. I like the ...
jboyles
jboyles@...
Apr 6, 2004 6:08 am
15457
Thanks, will check into it. Can't say i use the mike all of the time but it is one of the features on the 514 that was quite appealing especially for finger...
Dave Hillebrandt
dhillebrandt@...
Apr 6, 2004 9:47 am
15458
... to ... I'll buy into all your entries, they were all good ideas that died on the vine. The one thing I wished was still alive is a simple one-hex fuzz. The...
That's Bcause the strings were causing themselves 2 vibrate. I tiny current was pumped, literally, *thru* the strings since each was isolated from each other...
If anyone has a paper copy of the GR-09 manual, I'd be happy to convert it so that we can add it to the files section. e-mail me if interested. Thanks, Nick C...
I thought of another. Rhythm and Lead Preset Switch - The Beetle Quantar had a toggle switch that would switch between "Lead" and "Rhythm". In fact that would...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
