... -=- Hi Dieter, Thanks for the info on this LGX-SA. It's most likely an instrument manufactured more than 2 years ago. For checking if the Baggs pickup...
RMC
rmcpickup@...
Mar 1, 2006 9:29 am
19873
In article <du0s7u+ogqe@eGroups.com>, ... Hi Dieter, I had problems getting my Godin XTSA working with the Axon MKII, but did in the end with help from Andy...
... -=- Hi Paul, -=- Godin and Brian Moore guitars with RMC have been available all over the world for many years now, so Terratec is definitely in a position...
RMC
rmcpickup@...
Mar 1, 2006 9:57 pm
19875
I have a custom bass guitar with individual RMC piezo pickups. From what I've read, it sounds like the new Axon 100 MKII is the thing to get for this type of...
The AX100 Mark I certaily has a good vairiety of pretty good bass sounds, including picked, plucked, fretless, upright, synth, slapped, popped etc. But if I...
Dieter, I also had this problem at first with my 1999 LGX-SA and Axon-100 (original). If your LGX is an older one like mine it might be the same problem. How I...
Hi every one. There is I think a promissing new optical pick-up that can be use in pitch to MIDI application; http://www.optomik.com/ Does anyone no more about...
... From the looks of the guitar pickup it would get in the way of any hand muting at the bridge or simply resting the hand on the bridge. The bass model looks...
I sold off my GR33 in anticipation of the Axon MK II. Not only is it taking an endless amount of time for them to arrive in the US, but these reports of...
HI everyone worried about eh Axon AX100 mkii, I have had one of these for a while now and it is excellent, I also have a gr33 that has now been disconnected...
Hi Andrew and everyone Does the AX100 MK11 have nice pad sounds and do you think it will work well with a nylon frame guitar with RMC pick ups. This is a new...
... wrote: Hi Matt, thanks for your answer. I guess that is exactly my problem. Because RMC and GK-2 seems to work only my stupid ol Godin with LR Bags system...
Any clues on the following problem please guys I bought a GR33 two years ago to support a Roland ready Strat. After a few weeks I noticed that the volume...
Hi Joe On 02/03/2006 you wrote; JK> I couldn't get the English link to work and my JK> French isn't too sharp these days, but how does this interface with JK>...
This may be a little off topic, but I am seriously considering moving away from my RR strats and modded out cheapies and building my own guitar with parts from...
Shucks, I think that Joel uses such an instrument as his main midi guitar. Check out his midi guitar home page. --M ________________________________ From:...
... I don't know about the GR33, but on my GR20 you can adjust the sound levels individually for each string. There should be an equivalent function on the ...
i had the same problem and after i reset the unit and reinstalled the firmware, this tended to solve the problem, its worth a try, i changed my backup battery...
If all of these results were with the same 13 pin cable then be sure to try another one before sending the GR33 in for repair. Thanks, Dave ... From: Chris R...
I am interested in buying a Dc-13 dual bus converter bus which was designed so that roland guitar G-303 of 24pin allows to connect this old the guitars...
Ron, Sounds to me like you got a unit designed specifically for the Strat-type guitar. Which is to be expected, I guess. But FWIW, the Strat string spacing...
... Well I'll chime in for him for now. I use a custom modded Yamaha G1D on a Steinberger GM4T. My installation job can be seen in the photo section of the...
Hi Glenn and all, Accordong to the Terratec website, there's an US distributor called Synthax (www.synthax.com). I wrote them a few days ago, but still no ...
Hi all, This is the first sign I see from the MKII in the US -- meaning, someone who's selling it. http://www.sweetwater.com/store/detail/AX100mkII/ There...
Hi Does any one know if its possible to change presets onn the axon from a midifootcontroller (FCB1010) My setup is as follows: Behringer FCB1010 midi out to...
Hi arieri, should be no problem because either you program your devices with different chanels at you FCB1010 or you can use midi mapping function of the Axon....
Yes, but you must use MIDI Thru, not out: MIDI out of FCB1010 > MIDI in of first device. MIDI thru of first > MIDI in of second device. MIDI thru of second >...
Hi Nik and Dieter thanks for replying Yes of course midi thru solved the problem stupid me, I was a little foled because the vg-88 has only midi in and midi...
Nice to know 'Im not alone - (except mines 5th string related ). I'll review the settings tonight Brian Bob Campbell <rcampbell@...> wrote: The GR-33...
Nice to know 'Im not alone - (except mines 5th string related ). I'll review the settings tonight Brian Bob Campbell <rcampbell@...> wrote: The GR-33...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
