Hi - still at it, slowly.

I'm at the point of connecting the engine board to the front panel pieces. All
of it makes
sense to me, how to connect things, except the pulse bank disable switch. On my
engine
board, rev 4, there is a little blocked off section for these connections, with
a trig wire
connection, and 2 connections that are marked man. From the schematic, it looks
like one of
these wires is supposed to go to one side of the switch, and a wire from a +12v
source is
supposed to go to the other side. So the obvious question is - which wire do I
use? Or am I
misreading the schematic?

Thanks for any help!

Steve Drake