--- In milton-sequencer@yahoogroups.com, "sduck409" <sduck409@...>
wrote:
>
> Hi - still at it, slowly.
>
> I'm at the point of connecting the engine board to the front panel
pieces. All of it makes
> sense to me, how to connect things, except the pulse bank disable
switch. On my engine
> board, rev 4, there is a little blocked off section for these
connections, with a trig wire
> connection, and 2 connections that are marked man. From the
schematic, it looks like one of
> these wires is supposed to go to one side of the switch, and a
wire from a +12v source is
> supposed to go to the other side. So the obvious question is -
which wire do I use? Or am I
> misreading the schematic?
>
> Thanks for any help!
>
> Steve Drake
>
Hi
the 'trig' wire goes to the jack
the other two (man) go to a momentary switch (i use a push-button
with two terminals), it doesn't matter which way you connect them
cheers
andrew