* [minimalism] Vultures and a Birth Bash! *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] hi *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] 2009-04-21 -- 2009-04-25    JAUNA MUZIKA 2009 *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] Crank IglooDoom s/t *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

Sa. 02.05.2009
aufabwegen presents: Geraeuschwelten #49

doors: 20.00h, first show: 20.30h
tickets: 10,00 Euro

FRIEDER BUTZMANN
(Vertrauensmann des Volkes / Geraete & Gesang)
&
G*PARK
(aggressive electroacoustics, Tochnit Aleph, CH)
&
DAVE PHILLIPS
(Schimpfluch Gruppe, Vegan Noize, CH)
&
ANDREAS PAOLO PERGER
(o aufnahme � Gitarre Surround, AT)

Black Box/cuba
Achtermannstr. 12, 48143 Muenster

Mit Frieder Butzmann kommt � man darf den Begriff ruhig hier anf�hren � eine
echte IKONE des deutschen Undergrounds nach M�nster. Butzmann wird seine
�Lieder von Transport, Maschinerie und innerer Bewegung� pr�sentieren � eine
Mischung aus Vortrag, H�rspiel und Konzert. Ebenfalls sehr gespannt sein
darf man auf die Gastspiele der Schweizer G*Park und Dave Phillips.
Letzterer steht f�r bildgewaltige und harsche Performance-Gesten im Geiste
des Wiener Aktionismus. Ersterer reaktiviert sein Projekt nach etlichen
Jahren der Stille mit der �sthetik singender Eisbl�cke und hustender
Lautsprecher. Schlie�lich spielt noch der �sterreichische Gitarrist Andreas
Paolo Perger auf, der ein 5.1 Gitarrenst�ck pr�sentieren wird. Wieder hei�t
es: OHREN AUF!


-----------------
a u f a b w e g e n | Till Kniola
Lindenburger Allee 20 | 50931 Cologne | Germany
label & magazine: http://www.aufabwegen.com
mailorder: http://www.geraeuschwelten.de
asmus tietchens: http://www.tietchens.de
-----------------

* [minimalism] Frieder Butzmann/Dave Phillips/G*Park live *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] Vultures and Adam Bohman this Thursday! *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] Vultures and Adam Bohman this Thursday! *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

Hi again list folks!

Just a quick sorry to anyone that got multiple emails from me yesterday.
It was a delivery glitch by my service provider. Apparently some people
got ten copies of my announcement for the Vultures show tomorrow! Yikes!

It's all fixed now and again, I do apologise!

Take care and I hope to see you all at the show!
Will/Seesar
____________________________________________________________
Contractor Training - Click Here
http://thirdpartyoffers.netzero.net/TGL2241/fc/BLSrjpYbjI8S604J3IYYAuBhDc6H8xzqJ\
zT5nUB0F2RwB7UFXyVh04ae192/

* [minimalism] Apologies for Duplicate Emails! *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] salut *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] chaosmos.pl [1 Attachment] *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

Hello Emailing List Folks!

Vultures have two exciting gigs this weekend! First, on Friday 12 June,
we invade Nunhead, south of the river for a grand evening of noisy
goodness, featuring Ampersand, Ryan Jordan with Mat Hourteillan,
Cheapmachines, and Zolan Wobble's One True Dog.

The show starts at 19:30 at the Ivy House, 40 Stuart Rd. SE15 3 BE.
�5/�3 concs., so bring those student ids and UB40 papers!

Then, on Saturday 13 June during the day, Vultures will be providing
sound and visuals for a dance installation in Edmonton. Rebecca Bogue
and Jane Munro are participating in an ongoing art presentation arranged
by Sumer Erek and supported by the Enfield Council in which she and her
co-artists will dance/perform in a store front during "shopping hours"
to the music of Vultures, allowing passers by to "window shop" between
12:00 and 16:00. Please do come out and see this borough sponsored event!

The event takes place at the Edmonton Green Shopping Centre, North Mall,
Unit 4, Edmonton Green, N9. It's free - you're just window shopping
after all!

In other news: we're still finalizing the last few dates, but Vultures
is proud to announce that we will be traveling with Post Abortion Stress
this summer to join them in providing live sound tracks for a new series
of films by NYC film maker Robert Pepper! So far the tour is taking us
north, then to the continent through Holland, Germany, and even
Macedonia! We end up back in London for the 8 year anniversary
celebration at Boat Ting, Temple Pier. This is all happening from 22
August through 07 September (see our website for details -
http://www.myspace.com/justvultures)

Finally some releases will be emerging before that summer tour and maybe
even before our show this weekend! Tursa records compilation,
distributed through Cold Spring, will be out before the end of the
summer as will appearances on Against the Stream records, Love Torture
records, and a 4-way split on Black Pyramid records with three other
fabulous noise bands!

We are also proud to announce that we will participating in the
Dictaphonia Project spearheaded by Hal McGee, artist, improviser, and
composer from Gainsville, Florida, USA, in which a compilation of
dictaphone based recordings will be published by Hal with support from a
government grant. Should be an exciting release!

That's enough bombardment for now. There's more things on the stove too:
t-shirts, a slew of upcoming shows, an Italian tour, and several more
recordings being mixed down for various labels, but more on these things
later.

Thanks and as always, if you wish to be removed from this list, no
worries! Just ask.

Take care and we'll see you this weekend!
Will aka Seesar / Vultures
____________________________________________________________
You're never too old to date. Senior Dating. Click Here.
http://thirdpartyoffers.netzero.net/TGL2241/fc/BLSrjpYdji8g1bmG4IeM31wWDwRCiM6Gs\
YkGPnP7UGHCWNegJUaVs7JJLzS/

* South and North *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] Sarangi Reminder and other goodies *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism] ast#0040 Crank Sturgeon and kitty_kit "The organic cheese
strikes back" *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

* [minimalism]
=?iso-8859-1?Q?the_review_of_G_005_=3A_Y=D4KO_HIGASHI=2C_LIONEL_MARCHETTI?=
  =?iso-8859-1?Q?_-_=22OKURA_73=B0N_-_42=B0E=22?= *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist

dear all
aufabwegen is presenting these concerts in the next few weeks - please come
out if you can!
please check www.aufabwegen.com and www.geraeuschwelten.de

23.10.2009, 20.00h MUENSTER
geraeuschwelten #51
JOHN WIESE (USA)
small noises by this Sunn O)))/Wolf Eyes collaborator
&
MICHEL HENRITZI (F)
concrete death blues, ex-A Bruit Secret
&
HILTER + ORALAPOSTEL (D)
performance art a la COUM Transmissions meets electronics
@
blackbox/cuba-cultur
Achtermannstr. 12
48143 M�nster
http://www.blackbox-muenster.de

10 EUR

+++++++++++++++++++++++++++

28.10.2009, 20.00h KOELN
in cooperation with gerngesehen

LASSE MARHAUG/JOHN WIESE (NOR/USA)
german premiere by these two noise masters
&
NELLY BOYD KREIS plays PHILL NIBLOCK
pieces for electronics and electrioc guitars
@
Kunst-Station Sankt Peter
Jabachstr. 1
50676 K�ln
http://www.sankt-peter-koeln.de

10 EUR

++++++++++++++++++++++++++

09.11.2009, 20.00h KOELN

BROKEN SOUND #1

SoiSong (UK/RUS)
first German concert by the new project of Ivan Pavlov and Peter
Christopherson (Coil, Throbbing Gristle, Psychic TV)
&
STEN HANSON (S)
text-sound composition
&
BERND SCHURER (CH)
Komputermusick, domizil
@
Stadtgarten (Saal)
Venloer Str. 42
50674 K�ln
http://www.stadtgarten.de

12/10 EUR
tickets are going fast for this, please reserve at Stadtgarten!


-----------------
a u f a b w e g e n | Till Kniola
Lindenburger Allee 20 | 50931 Cologne | Germany
label & magazine: http://www.aufabwegen.com
mailorder: http://www.geraeuschwelten.de
asmus tietchens: http://www.tietchens.de
-----------------

* [minimalism] concert news SoiSong and more *

ERRORE:
	 Errore di sintassi o istruzione sconosciuta.

SOLUZIONE:

This is the Minimalist Mailing List Manager.

Commands may be either in subject of message (one command per message)
or in body (one or more commands, one per line). Batched processing starts
when subject either empty or contains command 'body' (without quotes) and
stops when either arrives command 'stop' or 'exit' (without quotes) or
gets 10 incorrect commands.

Supported commands are:

subscribe <list> [<email>] :
     Subscribe user to <list>. If <list> contains suffix '-writers', user
     will be able to write to this <list>, but will not receive messages
     from it.

unsubscribe <list> [<email>] :
     Unsubscribe user from <list>. Can be used with suffix '-writers' (see
     above description for subscribe)

auth <code> :
     Confirm command, used in response to subscription requests in some cases.
     This command isn't standalone, it must be used only in response to a
     request by Minimalist.

mode <list> <email> <mode> :
     Set mode for specified user on specified list. Allowed only for
     administrator. Mode can be (without quotes):
       * 'reader' - read-only access to the list for the user;
       * 'writer' - user can post messages to the list regardless of list's
                    status
       * 'usual' -  clear any two above mentioned modes
       * 'suspend' - suspend user subscription
       * 'resume' - resume previously suspended permission
       * 'maxsize <size>' - set maximum size (in bytes) of messages, which
                            user wants to receive
       * 'reset' - clear all modes for specified user

suspend <list> :
     Stop receiving of messages from specified mailing list

resume <list> :
     Restore receiving of messages from specified mailing list

maxsize <list> <size> :
     Set maximum size (in bytes) of messages, which user wants to receive

which [<email>] :
     Return list of lists to which user is subscribed

info [<list>] :
     Request information about all existing lists or about <list>

who <list> :
     Return the list of users subscribed to <list>

help :
     This message

Note, that commands with <email>, 'who' and 'mode' can only be used by
administrators (users identified in the 'mailfrom' authentication scheme or
who used a correct password - either global or local). Otherwise command will
be ignored. Password must be supplied in any header of message as fragment of
the header in the following format:

{pwd: list_password}

For example:

To: MML Discussion {pwd: password1235} <mml-general@...>

This fragment, of course, will be removed from the header before sending message
to subscribers.

--
In fede, il Minimalist