Posted to both Junkmusic and Oddmusic discussion groups Hey all, I'm in the middle of designing and about to start constructing a new piece for a theatre...
Paul, I missed the part about where the rocks are going to be placed in a position so that when the wind blows through this arrangement, the disturbance would...
Hi Oliver ... position so that when the wind >blows through this arrangement, the disturbance would cause a low drone that only a lizard or similar reptile ......
I don't know if this would work, but might be worth a try: In woodwoorking there's a type of blind mortise/tenon joint called a fox wedge. You cut a slot in...
Does anyone own one like this: a DigiTech 256 XL multi effects processor ? I have one but am unsure of what is capable of. No book came with it. jim for...
Some ideas? ummm. a wind harp? What else. I'm thinking; (this is not good for me to do.) Kids playgrounds, nice ones, sometimes have a tube that runs ...
Hi Paul, I used to work with adhesives, though I was just a technician, I did learn that there are indeed a vast number of "glues" out there, each with...
Hey Oliver, Jim, Dwight & Stan. I can just see reptilian graveyards like lines of dominoes stretching away into the distance Stan LOL Love the idea of the fox...
Just a last thought... I have been thinking about a metal rod inside a fibreglass tube. So the rod could be bolted to a big base to concrete in and- had you...
For epoxy I like PC-7. It comes as a gray paste and a black tar-like paste. It's very sticky but can be cleaned (before hardening) with alchohol. Home Depot...
Neil Feather
nfeather@...
Apr 1, 2003 9:45 pm
12747
Yep...I'm a full time potter, full time noise freak, and coming incrmentally closer to the povery line (from beneath!) Barry's a ceramist, too, and the...
Ohhhh. Ok. from, jim w. in maine. (that I can fire pottery with a fire kiln, as opposed to electric (220) or propane gas.) Here is the one site. Barry's: ...
... I squinted and tried to make out the list on this page, but I never saw anything listed. http://www.digitech.com/literature.htm The discontinued products...
... My favorite thing to do during pottery classes was to hold up a pot and do a long vocal drone up and down into it until I hit its natural note. It would...
Thanks again to all who have offered advice on tuners. I've been corresponding with a support person at Peterson about their tuners, having thought I would go...
You can do this somewhat with fired pots, but it's a lot more ... Boy Oliver, I thought that I might be the only one to notice this! I have day dreams of the...
One difficulty would be in determining the appropriate diameters for the desired pitches. The autoharp, like any stringed instrument, is designed for heavy...
... for the ... designed ... could ... very ... playing the ... same Okay. I wasn't sure whether this would work or not. Sounds like it wouldn't. ... I don't...
Karen - The wound strings on an autoharp are only wound up to the bridges. The only thing that goes through the pin hole is the core wire. If drilling out...
Try the Cyberpluckers e-list... http://www.autoharp.org Theres some excellent luthiers on there that have tried 'bout everything. Nice folks too. Mark (closet...
Hi Oddsters I just put a new mp3 file for download/stream at: http://trundlebox.iuma.com title: Ply Loop This minimal gritty loop was made using 6 metal...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
