Firstly I want to again thank Ken for the upgrade and walking me through it. Works like a charm. I also got the upgrade from peavey. Jimmy was very helpful and...
Check the pins for continuity with an ohm meter, I recently repaired an almost new cable, had a broken solder connection on one pin! Ken Fox 814 Wilburn St ...
My lcd screen in the tubefex has gone haywire missing characters etc I fixed it a couple of months ago but it is at it again, does any one know where I can get...
I'll be sending off my eprom chip to Peavey to have my Tubefex upgradded from v1.0 to v2 Does this affect the tone at all? Is there any consensus on the best...
I like the JJ ECC83S in my TubeFex. They're very warm tubes and should help with the mosquito-with-a-chainsaw distortion. The JJ's really brought my TF to...
I haven't upgraded yet, but as far as the best tubes to use, I've tried Groove Tubes, Marshall's and the original Sovtek's and they seem to sound pretty much...
It's been a while since I had mine open but regardless, your problem hopefully is not the screen but the ribbon cable or connector powering it. It may have...
Check to make sure the mounting nuts have not backed off. I have seen this twice already and they were shorting contacts out at the ribbon cable male...
I get the same screen with just the curser blocks no characters when I use a power adaptor and 5 pin midi cable....but before i sent the chip away it worked...
I have a good stock ready to ship. All are shipped Priorty Mail or Global Priority Mail. Let me know if you need one and any help with installation, etc. I...
Ken. Do you know if there are any battery problems with the autograph. Just curious. Dave fenderonly1 <foxy229@...> wrote: I have a good stock ready to...
Yes, I have two myself and they have those same batteries in them!! I replaced mine a few years ago. I have a hunch the same chip will work on them as well....
I was looking thur the files and came across [My TFP.mp3] My Best TFP Sounds. I would like to contact this person for settings. Please email reo@......
... On the same note, does anyone know who did Tones.mp3 on the bottom of the page. i absolutely LOVE the 3rd clip and would kill for the patch. Thanks, Donnie...
Damn, it has sure been a while... I just realized today that it's been 18 months since I went out with a special lady last, but I'm pretty happy to be heading...
georgette-murdock927@...
Jan 20, 2006 3:14 pm
8821
Damn, it has sure been a while... I just realized today that it's been 18 months since I went out with a special lady last, but I'm pretty happy to be heading...
georgette-murdock927@...
Jan 21, 2006 11:46 am
8822
Thought i would share something with ya'll. Great fun and it does actually work. Met my girl on here, http://www.freebeerishere.info/liko and so far it's been...
georgette-murdock927@...
Jan 22, 2006 2:08 pm
8823
To Moderator: I think we need to lock down the group, kick the spammers out and have new members submit requests to be added. This is getting ridiculous and...
Well I just got engaged! I can't believe it, just last year I was beginning to think i would never meet anyone. I'm 25 already and I thought it was all over....
georgette-murdock927@...
Jan 23, 2006 2:15 pm
8826
This is insane. This person needs to be removed, an obvious spammer! If you are not a spammer, then you should limit your discussion to Tubefex related...
I changed the joining status so that I have to approve. I also removed a couple spammers from the list. I think they usually join, send and quit, so we should...
Today I've repaired a Tubefex. The unit showed the welcome screen and the Clip LED was on. Knobs and buttons did't function, but the tubes seem to heat up. ...
I have a tubefex I bought used, and while the audio works ok, the display goes bonkers with random characters and garbage. If I remove the cover and reseat the...
Hi !! I've got a TubeFex (SN 09271752) with severals problem on it : The regulator 7805 (VR1602) was in short circuit and let pass is IN tension The RAM...
Check for loose 1/4" nuts that hold the display. I have seen them back off and short out the display cable header. Later models used screws to eliminate the...
Hey Group I am down sizing and have on the market 1 Transfex Pro 212's with updated eprom and amp cover, 1 Pfc 10 with udated eprom and cable, 1 Peavey CV1...
Last weekend I finally got around to installing the Battery-Less upgrade in my Tubefex (removed the blue battery), and at the same time, I updated my Eprom...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
