Hey Group I am down sizing and have on the market 1 Transfex Pro 212's with updated eprom and amp cover, 1 Pfc 10 with udated eprom and cable, 1 Peavey CV1...
Last weekend I finally got around to installing the Battery-Less upgrade in my Tubefex (removed the blue battery), and at the same time, I updated my Eprom...
To double check the ZMD chip, remove it and re-install the old memory chip and re-initialize. It will hold memory while the unit is on. Go thru the presents...
I had very little battery leakage. Nothing that reached the board itself. Just slight leakage on one side of the battery. I forgot to mention that I'm...
I've been recently struggling with the same thing on my TFPs (I have two of them that I'd recently done the mods on). Both of them had VERY minor battery...
Yes, that does sound very similar to my problem. Did you do the resistor mod and/or ground the motorpot? Also, how did you remove the leaky battery?...
First of all, let me apologize if I've misled you... I have the non-tubed Transfex Pro 212s, which is the Transtube Fex in a 2x12 combo, not the Tube Fex. ...
You can replace the battery or for about the same price get a memory chip from myself that gets rid of the battery forever! It is 25.00 via PayPal. Please...
I've had the same "warning battery low message" since I removed the battery & installed the memory chip. Up till now I have been the only one with the problem....
I have done over 300 chips and only seen a few with error messages. Each time it was a result of lands/traces destroyed by battery leakage. The memory chip has...
The sound of the power chords in this song always intrigued me... Tune Db, Ab, Db, Gb, Bb, Eb. 9,7,4,0,9,9, 9,7,4,0,9,9 9,7,4,0,9,9 A real blast, play at full...
Hi all, I just picked up a S/H Tubefex (v1.5) in the UK, and seem to have a problem with it: the preamp controls and all effects controls work fine, and I can...
Well, after some extensive searching on here, looks like I've found the solution - the thead starting with Message 8591. Off to RS tomorrow! Mark ... a ... ...
Good find! Consider a 2.0 upgrade: http://tubefex.home.comcast.net/TubeFexAddendum.html John ... From: marky_h2k To: tubefex@yahoogroups.com Sent: Wednesday,...
... John, I know I'm not the original poster, but thanks for the link. I have a Tubefex V1.2 and a PFC of unknown vintage that I am looking to upgrade both to...
replies below ... JF From: Timothy R. Hoerning John, I know I'm not the original poster, but thanks for the link. I have a Tubefex V1.2 and a PFC of unknown...
FWIW- I don't have the PFC, but I just got my Tubefex Eprom back from Peavey, yesterday. I had it re-programmed from v1.0 to 2.0. I pulled the Eprom from my...
First off, I wanted to thank John and everyone else who responded to my inquiries about getting the version upgraded. I'll be sending off my EPROM to Peavey...
When a PFC10 is upgraded to 2.0, the 9 switch becomes a mode toggle between preset select and effect on/off modes. This is only when running in "smart" mode -...
Personally I do not have a PFC, always wanted to but never had a chance, but I have a couple of TF's and I discovered one can buy the upgrading chip in BLANK,...
Update to my messages below - all working well now! Fantastic unit, produces some great tube sounds which I'm very pleased with. A couple of further questions ...
Hello everyone. I have a tube-fex in great shape. Latest software. moter pot replaced. Back input jack replaced. Battery mod done. I am in southeast Iowa and...
Thanks for the feedback! I had no idea since I did'nt see one on ebay now. I have bought quite a few things on ebay but have not sold. Seems it might be a...
Hi guys. I've become a victim of the dreaded "battery leak onto circuitboard" problem which plagues so many Tubefex users. I'm wondering if some of you can...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
