John and group I have been trying to figure out what is going on with my Tubefex. The volume drops after about 2 minutes and then returns to about 1/2 volume...
it has the z chip in it...cant remember exactly what chip thats called...but the one that needs no battery and has a resisitor soldered between the legs...
it has the z chip in it...cant remember exactly what chip thats called...but the one that needs no battery and has a resisitor soldered between the legs...
I forwarded your note to some of our service guys to see if they recognize the problem. I'll be in touch... JF From: larrydalealbrecht John and group I have...
thanks John, I may just send it in, Ken Fox told me to check the motor pot and for battery damage even though it had the batteryless mod. ... if it gets to...
I had posted about 3 weeks ago about tubefex and classic 50/50 rig I was having problems with and I just wanted to report back to the group about the solutions...
amongst the fear i have in my rack a tubefex is one of them and i use it only for different delays. one set at 60ms,250,500 and one that is 700 that repeats a...
Does anyone have a line on these chips? Tim Batt email doesn't work from the unofficial tubefex page. and I don't want to buy the larger quantities from elect...
I have been selling them for over a year and half now. Sold over 450 so far! I solder the chip on and ship USPS Priority Mail. Email me for price. I do...
That's a very good one to start with I'd say; however your amp is important at getting certain sound character. Good luck! jiggyman123 <jiggyman123@...>...
The most important thing you can do with that amp now is to make sure the memory battery has not leaked! If it is still in there then replace it with a...
Hi all! I just bought what amounts to be a new, old-stock Tubefex. The original purchaser had purchased it, used it for a recording session at his studio and...
... I'd replace tubes first in order to dicard this as a factor; next the motor-pot would be targeted; previous thinking Peavey-land... but Nate and Max are...
I have seen one Tubefex that show very little leakage on top of the board but had terrible damage underneath the board. That acid can move all over! Sounds...
that is of course...after you change the tubes and it still acts wierd ;) ... Tubefex. The original ... studio and it's been ... in it, and it's displaying ...
Hey Mike I had a similar problem with one that I purchased a couple months ago and while mine wasnt "NOS" it exhibited some bizzare behaviour volume wise that...
Michael, If the tubefex is working, passing signal when NOT using the tube, meaning no "TB" in the screen, I think I have the fix for you. Inside, there is a...
Thanks, Lee! I'll check it out. I've been in the middle of a move from Tacoma, WA to Leavenworth, KS... Still unpacking! Michael ... From: "brevsound"...
The price has now increased 50 percent due to the fact these are the last of the chips on the market. I had to order 100 to even get that good of a price! My...
ZMD sold those parts to Simtek. The complete Simtek part number should be STK16C88-WF45(I) ... the I is optional - if Industrial is more available than...
Thanks, I will look into that John. I sure hope our chip does not go away!! I have done a little over 500 in the last 1 1/2 years. I think that is just the...
I have only 70 left of the 100 ZMD chips I got in this week. They are going very fast! If you need one, please let me know and I will reserve a chip or chips...
Do these work with the transfex pro 212s _____ From: tubefex@yahoogroups.com [mailto:tubefex@yahoogroups.com] On Behalf Of fenderonly1 Sent: Sunday, September...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
